The automobile fault code U011C indicates a problem with the Rocker Arm Control Module ‘B’. The most common symptom is the Engine Light ON or Service Engine Soon Warning Light.

The cause of this fault code could be a faulty module, an open or shorted harness, or a poor electrical connection.

It is important to address this issue promptly as it can lead to engine performance problems. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour.

To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. It is crucial to interpret the fault code correctly to avoid further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of u011c fault code.

Here are the symptoms to look out for:

  • The fault code u011c is associated with several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
  • Additionally, the vehicle may experience problems with the speedometer or other gauges, and the ABS system may malfunction.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code u011c can be caused by a faulty module or poor electrical connection.

  • The automobile fault code u011c can be caused by a faulty Rocker Arm Control Module ‘B’.
  • It can also be caused by an open or shorted harness of the Rocker Arm Control Module ‘B’.
  • Additionally, a poor electrical connection in the circuit of the Rocker Arm Control Module ‘B’ can also lead to this fault code.

Below are the possible fixes for the automobile fault code u011c, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u011c, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U011C diagnosis and fixing cost is influenced by several factors. The estimated repair time for this code is 1.0 hour. The cost of repair is commonly charged between $75 and $150 per hour by most auto repair shops.

These factors play a significant role in determining the overall cost of fixing the U011C fault code.

It is important to consider these factors when seeking repairs for this issue.

The U011C code is a Controller Area Network (CAN) fault code. CAN is a vehicle bus standard that connects automotive devices without a host computer. CAN bus uses two wires for communication: CAN high and CAN low.

The U011C code sets when a periodic message from the Rocker Arm Control Module ‘B’ is not received. This fault code indicates a lost communication with the Rocker Arm Control Module ‘B’.

The Diagnostic Trouble Code (DTC) sets when the communication is lost.

What are the possible causes of the u011c automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u011c automobile fault code. This code is caused by a faulty Rocker Arm Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the u011c fault code?

If you’re experiencing the u011c fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Rocker Arm Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.

What are the signs that the Rocker Arm Control Module ‘B’ harness is open or shorted, causing the u011c fault code?

If the engine light or service engine soon warning light is on, it could be a sign of a faulty Rocker Arm Control Module ‘B’ or an open or shorted harness. To fix this, it is important to visually inspect the related wiring harness and connectors for any damage or corrosion. Additionally, check for broken, bent, or pushed out connector pins.

u011c error fault code explained

If your engine light is on, it could be due to a faulty Rocker Arm Control Module ‘B’, an open or shorted harness, or poor electrical connection. Check the wiring harness and connectors for damage, broken or corroded pins. Inspect the components and follow the possible causes listed above.

Scroll to Top