The OBD code P2757 for Toyota indicates an issue with the Torque Converter Clutch Pressure Control Solenoid (Shift Solenoid Valve SLU).
Symptoms include the Engine Light being ON.
Causes may include a faulty solenoid, wiring harness issues, or a faulty torque converter assembly.
This is a moderate issue that should be addressed promptly.
A possible fix is to inspect and repair any damaged components in the solenoid circuit.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Toyota p2757 OBD Code
The vehicle may experience harsh shifting or lack of acceleration with fault code P2757.
- Symptoms: Engine Light ON.
- Possible harsh shifting from the transmission.
- Vehicle may go into limp mode.
- Possible decrease in fuel efficiency.
Causes of the Toyota p2757 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P2757 in a Toyota typically indicates a malfunction related to the torque converter clutch pressure control solenoid.
- P2757 can be caused by a faulty Torque Converter Clutch Pressure Control Solenoid (Shift Solenoid Valve SLU).
- A Torque Converter Clutch Pressure Control Solenoid harness that is open or shorted.
- A Torque Converter Clutch Pressure Control Solenoid circuit with poor electrical connection.
- Or a faulty Torque Converter Assembly.
Fixing Toyota Error Code p2757 Step By Step
Address the issue by inspecting the pressure control solenoid B electrical circuit for Toyota code P2757.
- To fix Toyota OBDII code P2757, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the pressure control solenoid D.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the resistance of the pressure control solenoid D and replace it if necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Road test the vehicle to ensure the issue has been resolved.
Cost Of Fixing Toyota p2757 Fault Code
Diagnosing and repairing fault code P2757 on a Toyota involves addressing issues with the torque converter clutch pressure control solenoid.
The cost to diagnose and fix a Toyota OBD code P2757 typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.
Factors like shop rates and complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Toyota p2757 OBD Code
Code P2757 in Toyota indicates an issue with the torque converter clutch pressure control solenoid circuit.
Code P2757 for Toyota vehicles means the Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance or Stuck Off.
This code is triggered by the Engine Control Module (ECM) when it detects a performance issue or that the solenoid is stuck off in the torque converter clutch pressure control circuit.
This circuit is responsible for controlling the engagement and disengagement of the torque converter clutch, which helps improve fuel efficiency and reduce heat buildup in the transmission.
Mechanic’s Tech Notes
P2757 in Toyota indicates a torque converter clutch pressure control solenoid performance issue.
To diagnose and fix OBDII code P2757 in a Toyota, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the P2757 fault code.
FAQ
Common symptoms of OBD code P2757 in a Toyota: Engine Light ON, caused by faulty Torque Converter Clutch Pressure Control Solenoid or related wiring issues. Fix: Inspect and repair as needed.
OBD code P2757 in a Toyota is typically caused by a faulty Torque Converter Clutch Pressure Control Solenoid (Shift Solenoid Valve SLU) or related wiring issues.
Diagnose and repair OBD code P2757 in your Toyota: Symptoms Engine Light ON; Causes Faulty Shift Solenoid Valve SLU; Fix Inspect wiring harness and connectors for damage.
Wrap Up
If your Toyota is displaying OBD code P2757, you may experience harsh shifting, transmission slippage, or decreased fuel efficiency.
This code typically indicates an issue with the torque converter clutch pressure control solenoid circuit in the transmission.
Possible causes include a faulty solenoid, damaged wiring, or poor electrical connections.
To address Toyota OBD code P2757, start by inspecting the wiring harness and connectors related to the torque converter clutch pressure control solenoid.
Test the solenoid for proper operation and replace if necessary.
Ensure all electrical connections are secure and free of corrosion
