The OBD code B0108 for Toyota indicates an issue with the Front Passenger Airbag Assembly (P Squib).
Symptoms include the Air Bag Warning Light being ON.
This can be caused by a faulty airbag assembly, open/shorted harness, poor electrical connection, or a faulty Airbag Sensor Assembly.
It is a serious safety concern.
To fix, inspect wiring harness, connectors, and components for damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Toyota b0108 OBD Code
The vehicle displays a warning light indicating a fault with the Toyota B0108 code.
- Symptoms: Air Bag Warning Light ON
Causes of the Toyota b0108 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Toyota B0108 include issues with the front airbag sensor assembly.
- B0108 can be caused by a faulty Front Passenger Airbag Assembly (P Squib).
- A Front Passenger Airbag Assembly (P Squib) harness that is open or shorted.
- A Front Passenger Airbag Assembly (P Squib) circuit with poor electrical connection.
- A faulty Airbag Sensor Assembly.
Fixing Toyota Error Code b0108 Step By Step
Replace the front airbag sensor assembly to address Toyota fault code B0108.
- To fix Toyota OBDII code B0108, start by reviewing the possible causes and visually examining the wiring harness and connectors related to the airbag sensor circuit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, proceed to test the airbag sensor module for proper operation and communication.
- Replace the airbag sensor module if necessary.
- Finally, clear the fault code using a diagnostic scan tool and perform a test drive to ensure the issue has been resolved.
Cost Of Fixing Toyota b0108 Fault Code
The repair for Toyota fault code B0108 involves diagnosing and fixing an issue with the front airbag sensor.
The cost to diagnose and fix Toyota OBD code B0108 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Toyota b0108 OBD Code
The fault code B0108 in a Toyota indicates a problem with the front airbag sensor.
OBD code B0108 for Toyota vehicles indicates an issue with the front airbag sensor.
This code is triggered when there is a malfunction detected in the front airbag sensor circuit.
The front airbag sensor is responsible for detecting impacts and sending signals to deploy the airbags in the event of a collision.
When this sensor malfunctions, it can affect the proper deployment of the airbags, compromising the safety of the vehicle occupants.
Mechanic’s Tech Notes
For Toyota B0108 code, refer to detailed diagnostic information for troubleshooting guidance.
OBDII code B0108 in a Toyota typically indicates an issue with the curtain shield airbag sensor assembly.
To diagnose, use a scan tool to check for any other related fault codes and to monitor sensor data.
Visually inspect the wiring harness and connectors for any damage or corrosion.
Test the sensor’s power and ground circuits using a voltmeter to ensure proper voltage levels.
If no visible issues are found, the sensor assembly itself may need to be replaced.
Remember to clear the codes after any repairs are made to see if the issue returns.
FAQ
OBD code B0108 in a Toyota indicates an issue with the Front Passenger Airbag Assembly (P Squib). Check wiring harness, connectors, and components for damage.
Common symptoms of code B0108 in a Toyota include the Air Bag Warning Light being ON. Possible causes are a faulty Front Passenger Airbag Assembly (P Squib) or related wiring issues.
Diagnose and repair OBD code B0108 in a Toyota: Symptoms Air Bag Warning Light ON. Causes Faulty Front Passenger Airbag Assembly (P Squib). Fix Inspect wiring harness and connectors.
Wrap Up
If your Toyota is showing OBD code B0108 and your airbag warning light is illuminated, it may indicate a fault in the Frontal Collision Sensor Circuit.
This could be caused by a malfunctioning frontal collision sensor, damaged wiring harness, or poor connections at the sensor.
To address Toyota OBD code B0108, start by inspecting the wiring harness and connectors for any signs of damage or corrosion.
Test the frontal collision sensor for proper operation and ensure all connections are secure.
Replace any faulty components as needed to resolve the issue.
