The P244C automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light. It can be caused by various factors, including fuel system concerns, turbocharger system concern, exhaust leaks, oxidation catalytic converter (OC), and aftermarket exhaust accessories or performance modifications.
The importance of repairing this issue lies in the fact that it can lead to reduced engine performance and increased emissions.
The repair difficulty is moderate, and the fix involves visually inspecting the related wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time is estimated to be around 1.0 hour.
To interpret the fault code, one needs to check the “Possible Causes” listed above and perform a thorough inspection of the related components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P244C: Signs Of A Clogged Secondary Air Injection System
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of p244c fault code. Here are the symptoms to look out for:
- The P244C fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light, decreased engine performance, rough idling, engine stalling, reduced fuel efficiency, and increased emissions.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
P244C: What Triggers It?
There are several causes of the automobile fault code p244c, including fuel system concerns, turbocharger system concern, and more.
- The automobile fault code P244C can be caused by various factors.
- These include fuel system concerns, issues with the turbocharger system, exhaust leaks, problems with the oxidation catalytic converter (OC), and the use of aftermarket exhaust accessories or performance modifications.
- It is important to address these causes promptly to prevent further damage to the vehicle and ensure its optimal performance.
Fixing P244C: Your Guide To Clearing The Code
Below are some possible fixes for the automobile fault code p244c, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code p244c, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P244C: Affordable Fix For Your Car’s Secondary Air Injection System
The automobile fault code P244C is related to the secondary air injection system. The diagnosis cost may vary depending on the auto repair shop, but it is usually charged by the hour. The estimated repair time for this fault code is 1.0 hour.
The fixing cost will depend on the hourly rate charged by the auto repair shop, which can range from $75 to $150 per hour. Therefore, the fixing cost for P244C will be between $75 and $150, plus any additional parts or services required to fix the issue.
P244C: Your Car’s Exhaust System Needs Urgent Attention
The P244C fault code is related to the diesel particulate filter regeneration process. The Powertrain Control Module (PCM) monitors the conditions necessary for this process. If the level of diesel particulate filter regeneration is less than 10% of the target reduction after 13 minutes of active regeneration, the test fails and the P244C code is triggered.
This code specifically indicates that the exhaust temperature is too low for particulate filter regeneration in Bank 1.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P244C fault code. This code can be caused by fuel system concerns, turbocharger system concerns, exhaust leaks, oxidation catalytic converter (OC), or aftermarket exhaust accessories or performance modifications. To fix this issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P244C fault code, start by checking the possible causes, which include fuel system concerns, turbocharger system concerns, exhaust leaks, oxidation catalytic converter (OC), and aftermarket exhaust accessories or performance modifications. To fix the issue, visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
Yes, aftermarket exhaust accessories or performance modifications can cause the P244C fault code. This fault code is indicated by the engine light or service engine soon warning light turning on. The cause of this fault code can be fuel system concerns, turbocharger system concern, exhaust leaks, oxidation catalytic converter (OC), or aftermarket exhaust accessories or performance modifications. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and you have a P244C code, it could be due to fuel system or turbocharger concerns, exhaust leaks, or aftermarket modifications. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.
