The P3487 fault code in automobiles indicates a problem with the Cylinder Deactivation Solenoid, which can cause the engine light to turn on. The possible causes of this issue include low oil pressure, restricted oil passage, engine mechanical condition, faulty solenoid, or poor electrical connection. It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this fault code is estimated to be around 1.0 hour. To interpret the fault code, one must check the possible causes listed above and look for any damaged components or connector pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P3487: Unleashing The Symptoms Of A Faulty Variable Valve Timing System
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of p3487 fault code.
Here are the symptoms to look out for:
- The P3487 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, engine stalling, rough idling, decreased fuel efficiency, and difficulty starting the engine.
- Additionally, the vehicle may experience a loss of acceleration or a decrease in overall performance.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P3487: Uncovering The Culprits Behind The Fault Code
P3487 fault code can be caused by various factors such as low oil pressure, restricted oil passage, and faulty cylinder deactivation solenoid.
- The automobile fault code P3487 can be caused by low oil pressure, restricted oil passage, engine mechanical condition, faulty Cylinder Deactivation Solenoid, Cylinder Deactivation Solenoid harness being open or shorted, and Cylinder Deactivation Solenoid circuit having poor electrical connection.
Fix Code P3487: Simple Steps To Get Your Car Running
To fix the p3487 automobile fault code, check the possible causes and inspect related components for damage or corrosion.
- To fix the automobile fault code p3487, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P3487: Affordable Fix For Complex Auto Fault Code
The automobile fault code P3487 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the P3487 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
P3487: Your Engine’s Power Is At Risk – Here’s Why
The P3487 code indicates a problem with the exhaust valve control circuit of cylinder 11. This means that the Engine Control Module (ECM) is not able to properly control the deactivation of the exhaust valve in cylinder 11. This can lead to issues with fuel economy, oil consumption, noise and vibration levels, and exhaust emissions.
The transitions between V8 and V4 mode may also be affected, causing a rough ride for the vehicle operator. It is important to have this issue diagnosed and repaired by a qualified mechanic to ensure proper engine function.
FAQ
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P3487 fault code. This code can be caused by low oil pressure, restricted oil passage, engine mechanical condition, faulty Cylinder Deactivation Solenoid, Cylinder Deactivation Solenoid harness being open or shorted, or Cylinder Deactivation Solenoid circuit having a poor electrical connection. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P3487 fault code, start by checking the possible causes listed above. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues with the Cylinder Deactivation Solenoid harness and circuit connections.
Ignoring the P3487 fault code, which indicates low oil pressure or a faulty cylinder deactivation solenoid, can lead to serious engine damage. The engine light will remain on, and the vehicle may experience reduced performance or even stall. It is important to inspect the wiring harness and connectors and check for damaged components to prevent further damage.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light with the fault code P3487, check for low oil pressure, restricted oil passage, engine mechanical condition, faulty Cylinder Deactivation Solenoid, Cylinder Deactivation Solenoid harness, or poor electrical connection.
Visually inspect the related wiring harness and connectors, and check for damaged components and connector pins.
