The P3467 fault code in automobiles indicates a problem with the Cylinder Deactivation System. The symptom of this issue is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this fault code can be low oil pressure, restricted oil passage, engine mechanical condition, faulty Cylinder Deactivation Solenoid, or poor electrical connection in the Cylinder Deactivation Solenoid circuit.

The repair importance of this issue is high as it can lead to engine damage if not addressed promptly. The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is approximately 1.0 hour.

It is essential to interpret the fault code to identify the root cause of the problem and take appropriate action.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of p3467 fault code. Here are the symptoms to look out for:

  • The P3467 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine misfires, rough idling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience hesitation or stalling during acceleration, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P3467 automobile fault code can be caused by various factors, including low oil pressure and faulty solenoids.

  • The automobile fault code P3467 can be caused by several factors.
  • These include low oil pressure, restricted oil passage, engine mechanical condition, faulty Cylinder Deactivation Solenoid, Cylinder Deactivation Solenoid harness being open or shorted, and Cylinder Deactivation Solenoid circuit having poor electrical connection.
  • It is important to identify the root cause of the problem to ensure proper and effective solutions are implemented.

Below are the possible fixes for the automobile fault code p3467, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p3467, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P3467 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the P3467 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P3467 code indicates a problem with the cylinder deactivation system.

Specifically, it relates to cylinder 9 and the intake valve control circuit. The Engine Control Module (ECM) is unable to command the deactivation of cylinder 9’s intake valve. This can result in reduced fuel economy and increased emissions.

The issue may be caused by a faulty solenoid or wiring problem.

It is important to have the issue diagnosed and repaired promptly to prevent further damage to the engine.

What are the possible causes of the P3467 automobile fault code?

If you see the P3467 fault code on your vehicle, it means that the engine light is on. The possible causes of this fault code include low oil pressure, restricted oil passage, engine mechanical condition, faulty cylinder deactivation solenoid, cylinder deactivation solenoid harness is open or shorted, and cylinder deactivation solenoid circuit poor electrical connection. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components and broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P3467 fault code?

To fix the P3467 fault code, start by checking the possible causes listed above. Then, visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues with the Cylinder Deactivation Solenoid harness and circuit poor electrical connection.

What are the consequences of ignoring the P3467 fault code?

Ignoring the P3467 fault code, which indicates a problem with the Cylinder Deactivation Solenoid, can lead to serious consequences. The engine light will remain on, indicating a problem with the engine. The cause of the problem could be low oil pressure, restricted oil passage, engine mechanical condition, faulty Cylinder Deactivation Solenoid, or a poor electrical connection. To fix the issue, it is important to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p3467 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to low oil pressure, restricted oil passage, or a faulty Cylinder Deactivation Solenoid. Check the possible causes listed above, visually inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top