The P3190 automobile fault code indicates an air induction system malfunction, defective throttle body, improper fuel pressure, or other engine-related issues. The most common symptom is the engine light turning on.
The cause of the issue could be a defective engine, MAF meter, ECT sensor, or other components. The repair importance and difficulty depend on the specific cause of the issue.
To fix the problem, one should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components.
The repair time is estimated to be around 1.0 hour. To interpret the fault code, one should use an OBD-II scanner or code reader.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P3190: Unresponsive Acceleration – Symptoms & Solutions
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p3190 fault code. Here are the symptoms to look out for:
- The P3190 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
- Additionally, the vehicle may experience difficulty starting or fail to start altogether.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P3190: Common Culprits
The P3190 fault code in automobiles can be caused by a range of issues, including malfunctioning air induction systems and defective engine components.
- The automobile fault code P3190 can be caused by various factors such as malfunctioning air induction system, defective throttle body, improper fuel pressure, defective engine, defective Mass Airflow (MAF) meter, vehicle running out of fuel, defective Engine Coolant Temperature (ECT) sensor, defective crankshaft position sensor, defective camshaft position sensor, and defective Engine Control Module (ECM).
Fix Code P3190: Simple Steps To Get Your Car Running
To fix the p3190 fault code, check the possible causes and inspect related wiring harness, connectors, and components for damage or corrosion.
- To fix the automobile fault code P3190, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P3190: Affordable Fix For Complex Automobiles
The fault code P3190 indicates an issue with the hybrid powertrain system. The estimated repair time for this fault code is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for most shops to charge between $75 and $150 per hour.
Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the availability of replacement parts. It is important to address this fault code promptly to avoid further damage to the vehicle and ensure optimal performance.
P3190: The Silent Killer Of Your Hybrid’s Engine
The P3190 fault code is related to the Hybrid Vehicle Electronic Control Unit (HV ECU) and Engine Control Module (ECM). It occurs when the estimated torque produced by the engine is significantly lower than the target torque calculated by the ECM. This abnormal condition is detected when the engine RPM is fixed or more for a certain duration, and the ratio of estimated torque against target torque is less than 20 percent.
The result is poor engine power, and the DTC P3190 is set.
FAQ
If you see the P3190 fault code on your automobile, it means that the engine light is on, indicating an air induction system malfunction, defective throttle body, improper fuel pressure, defective engine, defective Mass Airflow (MAF) meter, vehicle out of fuel, defective Engine Coolant Temperature (ECT) sensor, defective crankshaft position sensor, defective camshaft position sensor, or defective Engine Control Module (ECM). To fix the issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P3190 fault code, which is indicated by the engine light being on, it’s likely due to an air induction system malfunction, defective throttle body, improper fuel pressure, or other issues. To fix it, start by checking the possible causes listed above and visually inspecting the wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re trying to fix the P3190 automobile fault code, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The code is caused by an air induction system malfunction, defective throttle body, improper fuel pressure, defective engine, defective Mass Airflow (MAF) meter, vehicle out of fuel, defective Engine Coolant Temperature (ECT) sensor, defective crankshaft position sensor, defective camshaft position sensor, or defective Engine Control Module (ECM).
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light with the P3190 code, check the air induction system, throttle body, fuel pressure, MAF meter, fuel level, ECT sensor, crankshaft and camshaft position sensors, and ECM.
Visually inspect the wiring harness and connectors for damage or corrosion.
