[SOLVED] P30B5 Code: Fixing Incorrect Nox Sensor 2 Signal Counter

The P30B5 fault code in automobiles indicates a problem with the NOx Sensor 2, which can cause the engine light to turn on.

The possible causes of this issue include a faulty NOx Sensor 2, an open or shorted NOx Sensor 2 harness, or a poor electrical connection in the NOx Sensor 2 circuit. To fix this problem, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0.

It is important to interpret the fault code correctly to ensure that the issue is resolved effectively.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of the p30b5 fault code. Here are some symptoms to look out for:

  • The P30B5 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, misfires, or hesitation during acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code P30B5 can be caused by a faulty NOx Sensor 2, an open or shorted NOx Sensor 2 harness, or a poor electrical connection in the NOx Sensor 2 circuit.

  • The automobile fault code P30B5 can be caused by a faulty NOx Sensor 2.
  • It can also be caused by an open or shorted NOx Sensor 2 harness.
  • Additionally, a poor electrical connection in the NOx Sensor 2 circuit can also trigger this fault code.

To fix the p30b5 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code P30B5, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage or corrosion.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P30B5 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of P30B5 will be between $75 and $150, depending on the repair time required.

The P30B5 fault code is related to the NOx Sensor 2 Signal Message Counter. Control modules monitor communication during normal vehicle operation. Each module maintains a transmit and receive error counter.

The DTC is set when the NOx Sensor 2 Signal Message Counter is incorrect.

What are the possible causes of the P30B5 automobile fault code?

If your engine light is on and you’re getting the P30B5 fault code, it could be due to a faulty NOx Sensor 2, an open or shorted NOx Sensor 2 harness, or a poor electrical connection in the NOx Sensor 2 circuit. To fix the issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P30B5 fault code?

If you’re experiencing the P30B5 fault code, which is indicated by the engine light or service engine soon warning light being on, there are a few things you can do to fix it. The cause of this issue could be a faulty NOx Sensor 2, an open or shorted NOx Sensor 2 harness, or a poor electrical connection in the NOx Sensor 2 circuit. To address these issues, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What are the consequences of not fixing the faulty NOx Sensor 2 causing the P30B5 fault code?

Ignoring the P30B5 fault code caused by a faulty NOx Sensor 2 can lead to serious consequences. The engine light or service engine soon warning light will remain on, indicating a problem with the vehicle’s emissions system. This can result in increased emissions, reduced fuel efficiency, and potential damage to the engine and catalytic converter. It is important to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components.

p30b5 error fault code explained

If your engine light is on, it could be due to a faulty NOx Sensor 2, an open or shorted NOx Sensor 2 harness, or a poor electrical connection in the NOx Sensor 2 circuit. To fix this, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top