The P3073 automobile fault code indicates a problem with the engine coolant pump.
The most common symptom is the engine light turning on. The cause could be a faulty engine coolant pump, an open or shorted harness, poor electrical connection, or a faulty engine control module.
It is important to address this issue promptly as it can lead to engine overheating and damage. The repair difficulty is moderate, with a repair time of 1.0.
To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Uncovering P3073: Common Symptoms You Need To Know
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p3073 fault code. Here are the symptoms to look out for:
- The P3073 fault code in an automobile can cause several symptoms.
- The most common symptom is the illumination of the engine light or service engine soon warning light.
- Other symptoms include rough idling, poor acceleration, stalling, and decreased fuel efficiency.
- The vehicle may also experience misfires, hesitation, and a lack of power.
- Additionally, the transmission may shift roughly or fail to shift at all.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding P3073: Common Causes Of The Fault Code
The automobile fault code P3073 can be caused by a faulty engine coolant pump, open or shorted harness, poor electrical connection, or a faulty ECM.
- The automobile fault code P3073 can be caused by a faulty engine coolant pump.
- It can also be caused by an open or shorted engine coolant pump harness.
- Another cause can be a poor electrical connection in the engine coolant pump circuit.
- Lastly, a faulty engine control module (ECM) can also trigger this fault code.
Fix Code P3073: Simple Steps To Get Your Car Running
Below are the possible fixes for the automobile fault code p3073.
- To fix the automobile fault code p3073, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P3073: Affordable Fix For Complex Automobiles
The automobile fault code P3073 has an estimated repair time of 1.0 hour.
The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.
Therefore, the fixing cost of P3073 will range between $75 and $150, depending on the repair time required.
These factors should be considered when estimating the cost of fixing the P3073 fault code.
P3073: Unleashing The Mystery Of Misfire Detection
The P3073 fault code indicates a problem with the engine coolant pump’s current. The engine coolant pump is responsible for maintaining an efficient engine operating temperature.
When the engine is cold, the coolant does not flow to the radiator until the thermostat opens. The DTC will be set when the Engine Coolant Pump Current is not within a calibrated range for greater than 3 seconds.
This fault code indicates that the engine coolant pump is not functioning properly, which can lead to engine overheating and damage.
FAQ
If you’re experiencing the P3073 fault code, your engine light may be on. This could be due to a faulty engine coolant pump, an open or shorted engine coolant pump harness, a poor electrical connection in the engine coolant pump circuit, or a faulty engine control module. To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the P3073 fault code, which is indicated by the engine light being on or the service engine soon warning light, there are a few possible causes. These include a faulty engine coolant pump, an open or shorted engine coolant pump harness, a poor electrical connection in the engine coolant pump circuit, or a faulty engine control module (ECM). To fix this issue, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
While a faulty Engine Control Module (ECM) is listed as a possible cause of the P3073 fault code, it is not a common cause. The most common cause of this code is a faulty Engine Coolant Pump or issues with its harness or circuit connection. To fix the issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and the code is P3073, it could be due to a faulty engine coolant pump, open or shorted harness, poor electrical connection, or a faulty ECM. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.
