[SOLVED] P3012 Code: Weak Battery Block 2 – Fix It Now!

The P3012 automobile fault code indicates a problem with the HV battery assembly or the battery ECU, triggering the engine light or service engine soon warning light to turn on.

The possible causes are a faulty HV battery assembly or a faulty battery ECU.

It is important to visually inspect the related wiring harness and connectors for any damage or corrosion. The repair time for this fault code is estimated at 1.0.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p3012 fault code.

Here are the symptoms to look out for:

  • The P3012 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include rough idling, poor acceleration, engine misfires, decreased fuel efficiency, and difficulty starting the vehicle.
  • Additionally, the car may experience stalling or hesitation while driving, and there may be a noticeable decrease in overall engine performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code P3012 can be caused by a faulty HV battery assembly or a faulty Battery ECU.

  • The automobile fault code P3012 can be caused by a faulty HV battery assembly.
  • It can also be caused by a faulty Battery ECU.
  • These are the only two causes of this particular fault code.

To fix the automobile fault code p3012, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p3012, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P3012 has an estimated repair time of 1.0 hour.

The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of P3012 will range between $75 and $150, depending on the repair time required.

The P3012 fault code indicates a problem with the hybrid battery blocks.

It specifically points to Battery Block 2 becoming weak. This means that there is an abnormal internal resistance or electromotive voltage in that particular block.

When the hybrid battery ECU detects this malfunction, it illuminates the MIL and sets the DTC.

It is important to address this issue promptly to prevent further damage to the hybrid battery system.

What are the possible causes of the P3012 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P3012 fault code. This code is usually caused by a faulty HV battery assembly or a faulty battery ECU. To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P3012 fault code?

If you’re experiencing the P3012 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few things you can do to fix it. Firstly, check for a faulty HV battery assembly or battery ECU. If these aren’t the issue, visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This should help you identify and fix the problem.

What are the steps to take when checking for damaged components and looking for broken, bent, pushed out, or corroded connector’s pins to fix the P3012 fault code?

If you’re experiencing the P3012 fault code, start by checking the “Possible Causes” listed above. Then, visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues with the HV battery assembly or Battery ECU that may be causing the Engine Light to turn on.

p3012 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty HV battery assembly or Battery ECU. Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top