The P2767 fault code in automobiles refers to a problem with the Input Speed Sensor circuit.
This issue is indicated by the Engine Light or Service Engine Soon Warning Light turning on.
The cause of this fault code could be a faulty Input Speed Sensor, an open or shorted Input Speed Sensor harness, or a poor electrical connection in the Input Speed Sensor circuit.
It is important to visually inspect the related wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated to be around 1.0.
To interpret the fault code, one must check the “Possible Causes” listed above and look for any broken, bent, pushed out, or corroded connector’s pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P2767: Transmission Slipping? Check These Symptoms Now!
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2767 fault code. Here are the symptoms to look out for:
- The P2767 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include harsh shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
- Additionally, the vehicle may experience difficulty shifting gears or may not shift gears at all.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P2767: Unraveling The Culprits Behind The Fault Code
The P2767 automobile fault code can be caused by a faulty input speed sensor, open or shorted harness, or poor electrical connection.
- The automobile fault code P2767 can be caused by a faulty Input Speed Sensor.
- It can also be caused by an open or shorted Input Speed Sensor harness.
- Additionally, a poor electrical connection in the Input Speed Sensor circuit can also trigger this fault code.
Fix Code P2767: Your Ultimate Guide
To fix the automobile fault code p2767, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code P2767, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2767: Affordable Fix For Complex Transmission Issue
The automobile fault code P2767 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosing and fixing the P2767 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
P2767: Transmission Input Speed Sensor Circuit No Signal
The P2767 code is related to the Input Speed Sensor in a vehicle’s transmission system.
This sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM).
If the Input Speed Sensor is out of factory specifications, the ECM sets the OBDII code and triggers the P2767 fault code. This code specifically indicates that there is no signal coming from the ‘B’ circuit of the InputTurbine Speed Sensor.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P2767 fault code. This code is usually caused by a faulty input speed sensor, an open or shorted input speed sensor harness, or a poor electrical connection in the input speed sensor circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P2767 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Input Speed Sensor or an open or shorted Input Speed Sensor harness. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and allow you to make the necessary repairs.
If you’re fixing the P2767 fault code, look out for the engine light or service engine soon warning light. The cause could be a faulty input speed sensor, an open or shorted input speed sensor harness, or a poor electrical connection in the input speed sensor circuit. To fix it, visually inspect the wiring harness and connectors, and check for damaged components or broken, bent, pushed out, or corroded connector pins.
Wrap Up
If your engine light is on and you have a P2767 fault code, it could be due to a faulty input speed sensor, open or shorted harness, or poor electrical connection. To fix it, visually inspect the wiring harness and connectors for damage or corrosion and check for broken or bent pins.
