If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the P2738 fault code.
This code is related to the transmission system and can be caused by a variety of issues such as low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, or a poor electrical connection.
It’s important to address this issue promptly as it can lead to further damage to your vehicle’s transmission. The repair difficulty is moderate, and it’s recommended to visually inspect the related wiring harness and connectors, and check for damaged components. The repair time is estimated at 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P2738: Signs Of A Failing Transmission
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2738 fault code. Here are the symptoms to look out for:
- The P2738 fault code in an automobile can cause several symptoms.
- The most common symptom is the illumination of the engine light or service engine soon warning light.
- Other symptoms include harsh shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
- Additionally, the vehicle may experience difficulty starting or may stall while driving.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P2738: Culprits Behind Transmission Pressure Control Solenoid Circuit High
The automobile fault code p2738 can be caused by a variety of factors, including low transmission fluid level and faulty transmission control solenoid valve.
- The automobile fault code P2738 can be caused by a low transmission fluid level.
- It can also be caused by dirty transmission fluid.
- Another cause of this fault code is a faulty Transmission Control Solenoid Valve.
- The Transmission Control Solenoid Valve harness being open or shorted can also cause this fault code.
- A poor electrical connection in the Transmission Control Solenoid Valve circuit can also be a cause.
- Lastly, a faulty Transmission Control Module (TCM) can cause the P2738 fault code.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fix Code P2738: Simple Steps To Get Your Car Running
Below are some possible fixes for the automobile fault code p2738, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code p2738, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2738: Affordable Fix For Complex Transmission Issue
The automobile fault code P2738 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
Therefore, the total cost of fixing the P2738 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
P2738: Your Transmission’s Cry For Help
The P2738 code is related to the Transmission Control Solenoid Valve. It indicates that the Control Circuit for Solenoid Valve 6 is experiencing low voltage.
This can cause issues with the transmission line pressure, leading to problems with shifting gears. If left unaddressed, this issue can cause further damage to the transmission system. It is important to have it diagnosed and repaired by a qualified mechanic.
FAQ
If you’re experiencing the P2738 fault code, your engine light may be on. This could be due to a low transmission fluid level, dirty transmission fluid, a faulty Transmission Control Solenoid Valve, or a poor electrical connection in the Transmission Control Solenoid Valve circuit. To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors for any damage or corrosion.
If you’re experiencing the P2738 fault code, your engine light may be on. This could be due to a low transmission fluid level, dirty transmission fluid, or a faulty Transmission Control Solenoid Valve. To fix this issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P2738 automobile fault code, you may notice that your engine light is on. This could be caused by a variety of issues, including low transmission fluid levels, dirty transmission fluid, a faulty Transmission Control Solenoid Valve, or poor electrical connections. To troubleshoot this issue, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins. Be sure to check the “Possible Causes” listed above to determine the best course of action for fixing the issue.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light with the P2738 code, check the transmission fluid level and inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
It could be caused by low transmission fluid level, dirty transmission fluid, faulty Transmission Control Solenoid Valve, Transmission Control Solenoid Valve harness is open or shorted, Transmission Control Solenoid Valve circuit poor electrical connection, or faulty Transmission Control Module (TCM).
