[SOLVED] P2724 Code: Fixing Stuck Pressure Control Solenoid ‘e’

The P2724 automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light.

It is caused by a low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘E’, or a poor electrical connection in the line pressure solenoid valve ‘E’ circuit. The importance of repairing this issue lies in the fact that it can lead to serious transmission problems if left unaddressed. The repair difficulty is moderate, and it takes approximately 1.0 hour to fix.

To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2724 fault code. Here are the symptoms to look out for:

  • The P2724 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include harsh shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
  • Additionally, the vehicle may experience difficulty shifting gears or may not shift gears at all.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2724 can be caused by various factors, including low transmission fluid level and faulty line pressure solenoid valve ‘E’.

  • The automobile fault code P2724 can be caused by a low transmission fluid level.
  • It can also be caused by dirty transmission fluid.
  • Another cause of this fault code is a faulty line pressure solenoid valve ‘E’.
  • Additionally, the fault code can be caused by an open or shorted harness of the line pressure solenoid valve ‘E’.
  • Lastly, a poor electrical connection in the circuit of the line pressure solenoid valve ‘E’ can also cause the P2724 fault code.

Below are the possible fixes for the automobile fault code p2724, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2724, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage or corrosion.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2724 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the P2724 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2724 code refers to a problem with the Pressure Control (PC) Solenoid Valve in the transmission system of a vehicle.

The PC Solenoid Valve is responsible for regulating the transmission line pressure based on the current flow through its coil windings. When the PC Solenoid Valve is stuck in the open position, as indicated by the ‘E’ in the code, it can cause a decrease in line pressure and potentially lead to transmission issues.

What are the possible causes of the P2724 automobile fault code?

If you see the engine light on or service engine soon warning light, it could be due to the P2724 fault code. This code is usually caused by low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘E’, open or shorted line pressure solenoid valve ‘E’ harness, or poor electrical connection in the line pressure solenoid valve ‘E’ circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P2724 automobile fault code?

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the P2724 fault code. This code is typically caused by low transmission fluid levels, dirty transmission fluid, a faulty line pressure solenoid valve ‘E’, or a poor electrical connection in the line pressure solenoid valve ‘E’ circuit. To fix this issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

Is it necessary to visually inspect the related wiring harness and connectors to fix the P2724 automobile fault code?

Yes, it is necessary to visually inspect the related wiring harness and connectors to fix the P2724 automobile fault code. This is because the fault code can be caused by an open or shorted harness, or poor electrical connection in the line pressure solenoid valve ‘E’ circuit. Checking for damaged components and inspecting the connectors’ pins for any damage or corrosion can help identify and fix the issue.

p2724 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘E’, or poor electrical connection. Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top