[SOLVED] P2720 Code: Low Pressure Control Solenoid ‘d’ – Fix Now!

The P2720 automobile fault code is a transmission-related issue that triggers the Engine Light ON or Service Engine Soon Warning Light. The code is caused by a low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, or a poor electrical connection in the line pressure solenoid valve ‘D’ circuit.

The importance of repairing this issue lies in the fact that it can lead to serious transmission problems if left unaddressed.

The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time is estimated to be around 1.0 hour.

It is crucial to interpret the fault code correctly to ensure the proper repair is performed.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be a sign of p2720 fault code. Here are the symptoms to look out for:

  • The P2720 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include harsh shifting, transmission slippage, decreased fuel efficiency, and difficulty shifting gears.
  • Additionally, the vehicle may experience a decrease in power or acceleration, and the transmission may fail to engage or disengage properly.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P2720 can be caused by various factors, including low transmission fluid level and faulty line pressure solenoid valve ‘D’.

  • The automobile fault code P2720 can be caused by a low transmission fluid level.
  • It can also be caused by dirty transmission fluid.
  • Another cause of this fault code is a faulty line pressure solenoid valve ‘D’.
  • Additionally, the fault code can be caused by an open or shorted harness of the line pressure solenoid valve ‘D’.
  • Lastly, a poor electrical connection in the circuit of the line pressure solenoid valve ‘D’ can also cause the P2720 fault code.

To fix the p2720 fault code, check the possible causes and inspect the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code P2720, you need to check the possible causes listed above.
  • Inspect the wiring harness and connectors visually.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2720 can be diagnosed and fixed in an estimated repair time of 1.0 hour.

The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of diagnosis and fixing the P2720 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P2720 code refers to a problem with the Pressure Control (PC) Solenoid Valve in the transmission system of a vehicle. The PC Solenoid Valve is responsible for regulating the transmission line pressure based on the current flow through its coil windings.

When the P2720 code is triggered, it indicates that there is a low control circuit voltage in the PC Solenoid Valve ‘D’, which can cause issues with the transmission line pressure and ultimately affect the vehicle’s performance.

What are the possible causes of the P2720 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2720 fault code. This code is usually caused by low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, open or shorted line pressure solenoid valve ‘D’ harness, or poor electrical connection in the line pressure solenoid valve ‘D’ circuit. To fix this issue, you should check the possible causes mentioned above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.

How can I fix the P2720 automobile fault code?

If you’re experiencing the P2720 fault code, indicated by the engine light or service engine soon warning light, it could be due to low transmission fluid level, dirty transmission fluid, or a faulty line pressure solenoid valve ‘D’. To fix it, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.

What should I visually inspect to troubleshoot the P2720 automobile fault code?

If you’re experiencing the P2720 fault code, which is indicated by the engine light or service engine soon warning light turning on, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Additionally, check the possible causes listed above, which include low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, and poor electrical connection in the line pressure solenoid valve ‘D’ circuit.

p2720 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to low transmission fluid level, dirty transmission fluid, or a faulty line pressure solenoid valve ‘D’. Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded connector pins.

Scroll to Top