[SOLVED] P2714 Code: Fixing Pressure Control Solenoid ‘d’ Performance Issues

The P2714 automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light. This code is related to the transmission system and can be caused by low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, or poor electrical connection in the circuit.

The importance of repairing this issue lies in the fact that it can lead to serious transmission problems if left unattended. The repair difficulty is moderate, and it takes around 1.0 hour to fix.

To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2714 fault code.

Here are the symptoms to look out for:

  • The P2714 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include harsh shifting, delayed shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
  • Additionally, the vehicle may experience difficulty accelerating or may not move at all.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2714 can be caused by various factors such as low transmission fluid level and faulty line pressure solenoid valve ‘D’.

  • The automobile fault code P2714 can be caused by a low transmission fluid level.
  • It can also be caused by dirty transmission fluid.
  • Another cause of this fault code is a faulty line pressure solenoid valve ‘D’.
  • Additionally, the fault code can be caused by an open or shorted harness of the line pressure solenoid valve ‘D’.
  • Lastly, a poor electrical connection in the circuit of the line pressure solenoid valve ‘D’ can also cause the fault code P2714.

To fix the p2714 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p2714, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2714 relates to the transmission pressure control solenoid. The diagnosis involves checking the wiring and connections, as well as testing the solenoid itself. The estimated repair time for this fault code is 1.0 hour.

The cost of fixing this issue will depend on the hourly rate of the auto repair shop, which typically ranges between $75 and $150 per hour. Other factors that may influence the cost include the location of the repair shop, the make and model of the vehicle, and the availability of replacement parts.

The P2714 code refers to the Pressure Control Solenoid ‘D’ PerformanceStuck Off.

Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation.

The ECM adjusts the current to the shift solenoid valve SLT to control hydraulic line pressure. The MIL turns on and stores this DTC when the amount of heat absorption exceeds the specified value. When the shift solenoid valve SLT remains on, the line pressure goes down, and the clutch engagement force decreases.

What are the possible causes of the P2714 automobile fault code?

If you see the engine light on or service engine soon warning light, it could be due to the P2714 fault code. This code is usually caused by low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, open or shorted line pressure solenoid valve ‘D’ harness, or poor electrical connection in the line pressure solenoid valve ‘D’ circuit. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P2714 automobile fault code?

If you’re experiencing the P2714 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few possible causes to consider. These include low transmission fluid level, dirty transmission fluid, faulty line pressure solenoid valve ‘D’, an open or shorted line pressure solenoid valve ‘D’ harness, or a poor electrical connection in the line pressure solenoid valve ‘D’ circuit. To fix the issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

Is it necessary to visually inspect the related wiring harness and connectors to fix the P2714 automobile fault code?

Yes, it is necessary to visually inspect the related wiring harness and connectors to fix the P2714 automobile fault code. This is because the fault code can be caused by an open or shorted harness, or poor electrical connection in the line pressure solenoid valve ‘D’ circuit. Checking for damaged components and inspecting the connectors’ pins for any damage or corrosion can help identify and fix the issue.

p2714 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light with the fault code p2714, check the transmission fluid level and condition. Also, inspect the line pressure solenoid valve ‘D’ and its related wiring harness and connectors for any damage or poor electrical connection.

Scroll to Top