[SOLVED] P2706 Code: Fix Your Transmission With Shift Solenoid ‘f’

The P2706 automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light.

This fault code is caused by dirty or low transmission fluid, faulty shift solenoid ‘F’, or a poor electrical connection in the shift solenoid ‘F’ circuit. The importance of repairing this issue lies in the fact that it can lead to serious transmission problems if left unaddressed. The repair difficulty is moderate, and it takes approximately 1.0 hour to fix.

To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2706 fault code.

Here are the symptoms to look out for:

  • The P2706 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include harsh shifting, transmission slippage, decreased fuel efficiency, and decreased engine performance.
  • Additionally, the vehicle may experience difficulty shifting gears, or the transmission may fail to engage altogether.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P2706 fault code in automobiles can be caused by various factors such as low transmission fluid and faulty shift solenoid ‘F’.

  • The automobile fault code P2706 can be caused by dirty or low transmission fluid.
  • Another cause could be a faulty shift solenoid ‘F’.
  • Additionally, the shift solenoid ‘F’ harness being open or shorted can also trigger this fault code.
  • Lastly, a poor electrical connection in the shift solenoid ‘F’ circuit can also be a cause of the P2706 fault code.

To fix the p2706 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code P2706, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2706 relates to a malfunction in the transmission friction element D application. The estimated repair time for this issue is 1.0 hour.

The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour. Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.

The P2706 code is related to the Transmission Control System. The Transmission Control System uses six electronically controlled solenoids that allow hydraulic fluid to be applied to various friction elements.

The P2706 code specifically refers to the Shift Solenoid ‘F’.

The continuity of each solenoid circuit is periodically tested, and if an inductive spike is not sensed by the Transmission Control System during the continuity check, the appropriate Diagnostic Trouble Code (DTC) is set. If the solenoid test is run in response to a gear ratio or pressure switch error, one failure will result in setting the appropriate DTC.

What are the possible causes of the P2706 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2706 fault code. This code can be caused by dirty or low transmission fluid, a faulty shift solenoid ‘F’, an open or shorted shift solenoid ‘F’ harness, or a poor electrical connection in the shift solenoid ‘F’ circuit. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P2706 fault code?

If you’re experiencing the P2706 fault code, start by checking the possible causes, including dirty or low transmission fluid, a faulty shift solenoid ‘F’, or a poor electrical connection in the shift solenoid ‘F’ circuit. To fix the issue, visually inspect the related wiring harness and connectors for any damage or corrosion. Look for broken, bent, pushed out, or corroded connector pins to ensure a proper electrical connection.

What are the signs of damaged components that I should look for when fixing the P2706 fault code?

If you’re fixing the P2706 fault code, look out for the engine light or service engine soon warning light. The possible causes include dirty or low transmission fluid, faulty shift solenoid ‘F’, shift solenoid ‘F’ harness being open or shorted, or shift solenoid ‘F’ circuit having a poor electrical connection. To fix it, visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p2706 error fault code explained

If your engine light is on and you have a P2706 fault code, it could be due to dirty or low transmission fluid, a faulty shift solenoid ‘F’, or a poor electrical connection. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top