The P2659 fault code in automobiles refers to a problem with the ‘A’ Rocker Arm Actuator circuit.
The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this issue could be low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator, or a poor electrical connection in the circuit.
The repair importance is high as it can lead to engine damage if left unaddressed. The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time is estimated to be around 1.0 hour.
To interpret the fault code, one needs to use an OBD-II scanner or code reader.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P2659: Unresponsive Acceleration – Symptoms Explained
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2659 fault code.
Here are the symptoms to look out for:
- The P2659 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include a decrease in engine power, reduced fuel efficiency, and difficulty starting the engine.
- Additionally, the vehicle may experience rough idling or stalling, and the transmission may shift poorly or not at all.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P2659: Uncovering The Culprits Behind The Fault Code
P2659 fault code in automobiles can be caused by various factors such as low engine oil, incorrect oil type, faulty actuator, and poor electrical connection.
- The automobile fault code P2659 can be caused by low or overfilled engine oil.
- It can also be caused by using an incorrect engine oil type.
- Another cause of this fault code is a faulty ‘A’ Rocker Arm Actuator.
- An open or shorted ‘A’ Rocker Arm Actuator harness can also trigger this fault code.
- Lastly, a poor electrical connection in the ‘A’ Rocker Arm Actuator circuit can cause the P2659 fault code to appear.
Fix Code P2659: Simple Steps To Get Your Car Running
To fix the p2659 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code p2659, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
- Ensure that everything is in good condition.
- The estimated repair time for this fix is 1.0 hour.
P2659: Affordable Fix For Complex Engine Issue
The automobile fault code P2659 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.
Therefore, the total cost of fixing the P2659 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
P2659: Your Engine’s Secret Alarm Bell
The P2659 code is related to the Rocker Arm Oil Control Solenoid ‘A’ Circuit High Voltage Bank.
The Engine Control Module (ECM) commands the Rocker Arm Actuator to control the oil hydraulic circuit.
The variable valve timing (VVT) system is used to improve engine’s performance, fuel economy or emissions.
The ECM monitors the Rocker Arm Actuator circuit and sets the OBDII when the ‘A’ Rocker Arm Actuator circuit is out of factory specifications.
FAQ
If you see the engine light on or service engine soon warning light, it could be due to the P2659 fault code. This code can be caused by low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator, ‘A’ Rocker Arm Actuator harness being open or shorted, or poor electrical connection in the ‘A’ Rocker Arm Actuator circuit. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P2659 fault code in your car, which is indicated by the engine light being on, it could be due to low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator, or a poor electrical connection in the ‘A’ Rocker Arm Actuator circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
It is not safe to drive with the engine light ON due to the P2659 fault code. The cause of this fault code could be low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator, or a poor electrical connection. To fix this issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.
Wrap Up
If you see the Engine Light ON, it could be due to low or overfilled engine oil, incorrect engine oil type, faulty ‘A’ Rocker Arm Actuator, or poor electrical connection. Check the possible causes, inspect wiring harness and connectors, and look for damaged components.
