The P2536 fault code in automobiles refers to a problem with the Body Control Module (BCM). The most common symptom of this issue is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this fault code could be a faulty BCM, an open or shorted BCM harness, or a poor electrical connection in the BCM circuit.
The importance of repairing this issue lies in the fact that it can affect the overall performance of the vehicle. The repair difficulty is moderate, and the repair time is estimated to be around 1.0 hour. To fix this issue, one should visually inspect the related wiring harness and connectors and check for damaged components.
It is essential to look for broken, bent, pushed out, or corroded connector’s pins.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
P2536: Warning Signs Of A Faulty Fuel Pump Control Circuit
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2536 fault code.
Here are the symptoms to look out for:
- The P2536 fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding P2536: Common Causes Of The Fault Code
P2536 fault code can be caused by a faulty BCM, open or shorted BCM harness, or poor electrical connection.
- The automobile fault code P2536 can be caused by a faulty Body Control Module (BCM).
- It can also be caused by an open or shorted Body Control Module harness.
- Additionally, a poor electrical connection in the Body Control Module circuit can also trigger this fault code.
Fix Code P2536: Quick Steps To Get Your Car Running
Below are the possible fixes for the automobile fault code p2536, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code p2536, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2536: Affordable Fix For Your Car’s Electrical System
The automobile fault code P2536 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.
Therefore, the total cost of fixing the P2536 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
P2536: Your Car’s Fuel Pump Control Circuit – Explained
The P2536 code is related to the Ignition Accessory Switch Circuit. The control module monitors the voltage on the Ignition AccessoryRun circuit from the BCM. If the voltage is less than 6V for 1 minute, the DTC will be set.
This code indicates a problem with the ignition switch or circuit. It can cause issues with starting the engine or powering up the control module. A qualified mechanic should diagnose and repair the issue to prevent further damage.
FAQ
If you see the engine light or service engine soon warning light on your dashboard, it could be due to the P2536 fault code. This code is triggered by a faulty Body Control Module (BCM), an open or shorted BCM harness, or a poor electrical connection in the BCM circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
When the P2536 fault code appears, the engine light or service engine soon warning light turns on, indicating a problem with the Body Control Module (BCM). The cause could be a faulty BCM, an open or shorted BCM harness, or a poor electrical connection in the BCM circuit. To identify if the BCM harness is open or shorted, visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help in fixing the issue.
If you’re experiencing the P2536 fault code, start by checking the Body Control Module (BCM) and its related wiring harness and connectors. Look for any damaged components and inspect the connector’s pins for any signs of breakage, bending, pushing out, or corrosion. This will help you identify any open or shorted circuits and poor electrical connections. Once you’ve identified the issue, take the necessary steps to fix it.
![p2536 error fault code explained](https://carmodnerd.com/wp-content/uploads/2023/06/P2536-error-fault-code.jpg)
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Body Control Module (BCM), an open or shorted BCM harness, or poor electrical connection.
Check the wiring harness and connectors for damage, broken, bent, pushed out, or corroded pins.