The P252E automobile fault code indicates a problem with the engine oil quality sensor.

This can cause the engine light to turn on, indicating a need for service.

The cause of this issue could be a faulty sensor, an open or shorted harness, or poor electrical connections. It is important to visually inspect the wiring harness and connectors for any damage or corrosion.

The repair time for this issue is estimated to be around 1.0.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above and look for any broken or bent components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be due to the p252e fault code. Symptoms include:

  • The P252E fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, such as delayed or harsh shifting.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code p252e can be caused by various factors, including a faulty engine oil quality sensor, open or shorted harness, and poor electrical connection.

  • The automobile fault code P252E can be caused by a faulty engine oil quality sensor.
  • It can also be caused by an open or shorted harness of the engine oil quality sensor.
  • Additionally, a poor electrical connection in the engine oil quality sensor circuit can also trigger this fault code.

To fix the automobile fault code p252e, check the possible causes and inspect related components for any damage or corrosion.

  • To fix the automobile fault code p252e, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P252E has an estimated repair time of 1.0 hour. The cost of fixing this code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of P252E will be between $75 and $150, depending on the repair time required.

The P252E code is related to the Engine Oil Quality Sensor Circuit. The Powertrain Control Module (PCM) monitors this circuit.

If the signal from the Engine Oil Quality Sensor is not within factory specifications, the PCM sets the OBDII code.

The P252E code specifically indicates an intermittent or erratic signal from the Engine Oil Quality Circuit. This fault code should be addressed promptly to ensure proper engine performance and prevent potential damage.

What are the possible causes of the P252E automobile fault code?

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P252E fault code. This code is usually caused by a faulty Engine Oil Quality Sensor, an open or shorted Engine Oil Quality Sensor harness, or a poor electrical connection in the Engine Oil Quality Sensor circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P252E fault code?

If you’re experiencing the P252E fault code, start by checking the possible causes listed above. To visually inspect the related wiring harness and connectors, look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues with the Engine Oil Quality Sensor harness and circuit connections.

What are the signs of damaged components or broken, bent, pushed out, or corroded connector’s pins that I should look for when fixing the P252E fault code?

If you’re fixing the P252E fault code, you should look for signs of damaged components or broken, bent, pushed out, or corroded connector’s pins. These issues can cause the Engine Light to turn on, indicating a problem with the Engine Oil Quality Sensor. To fix the issue, visually inspect the related wiring harness and connectors, and check for any of these signs of damage.

p252e error fault code explained

If your engine light is on, it could be due to a faulty engine oil quality sensor, an open or shorted sensor harness, or a poor electrical connection.

Check the possible causes, inspect the wiring harness and connectors, and look for any damaged components or corroded pins.

Scroll to Top