The P2522 fault code in automobiles refers to an issue with the low side pressure sensor circuit. This can cause the engine light to turn on, indicating a problem that needs attention. The cause of this issue can be low or too much refrigerant, a faulty low side pressure sensor, or poor electrical connections.

It is important to address this issue promptly as it can affect the performance of the vehicle.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken or corroded pins. The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the possible causes listed above and visually inspect the related components.

Repair Importance Level3.33 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2522 fault code.

Here are the symptoms to look out for:

  • The P2522 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include a decrease in engine power, reduced fuel efficiency, and difficulty shifting gears.
  • Additionally, the vehicle may experience transmission slippage, harsh shifting, or even complete transmission failure.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2522 can be caused by various factors such as low or excessive refrigerant and faulty sensors.

  • The automobile fault code P2522 can be caused by low refrigerant levels, excessive refrigerant levels, a faulty low side pressure sensor, an open or shorted low side pressure sensor harness, and poor electrical connections in the low side pressure sensor circuit.

To fix the automobile fault code p2522, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code P2522, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2522 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of diagnosis and fixing the P2522 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2522 code is related to the Air Condition (AC) Pressure Sensor.

The Powertrain Control Module (PCM) monitors the refrigerant pressure through this sensor. The PCM sets the OBII code when the signal from the sensor is out of factory specifications. The code specifically refers to an AC Request ‘B’ Circuit issue.

What are the possible causes of the P2522 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2522 fault code. This code can be caused by low or too much refrigerant, a faulty low side pressure sensor, or a poor electrical connection in the low side pressure sensor circuit. To fix this issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

How can one visually inspect the related wiring harness and connectors to fix the P2522 fault code?

If you’re experiencing the P2522 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few possible causes to consider. These include low or too much refrigerant, a faulty Low Side Pressure Sensor, or a poor electrical connection in the Low Side Pressure Sensor circuit. To fix the issue, start by visually inspecting the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What are the consequences of ignoring the P2522 fault code?

Ignoring the P2522 fault code can lead to serious consequences such as reduced fuel efficiency, engine damage, and even complete engine failure. The fault code is usually caused by low or too much refrigerant, a faulty low side pressure sensor, or poor electrical connection. It is important to visually inspect the related wiring harness and connectors, and check for damaged components to avoid further damage.

p2522 error fault code explained

If your engine light is on and you have a P2522 code, it could be due to low or too much refrigerant, a faulty low side pressure sensor, or poor electrical connection.

Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.

Scroll to Top