[SOLVED] P2464 Code: Low Diesel Particulate Filter Pressure – Fix Now!

The P2464 fault code in automobiles indicates a problem with the Diesel Particulate Filter Differential Pressure sensor.

This issue is often signaled by the Engine Light or Service Engine Soon Warning Light turning on. The cause of this fault code could be a faulty sensor, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can lead to reduced engine performance and increased emissions.

The repair process involves visually inspecting the wiring harness and connectors for damage and checking for broken or corroded pins.

The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level6.67 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be a sign of p2464 fault code. Here are the symptoms to look out for:

  • The P2464 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience increased emissions, a decrease in overall performance, and a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P2464 fault code can be caused by a faulty sensor, openshorted harness, or poor electrical connection.

  • The automobile fault code P2464 can be caused by a faulty Diesel Particulate Filter Differential Pressure sensor.
  • It can also be caused by an open or shorted Diesel Particulate Filter Differential Pressure sensor harness.
  • Additionally, a poor electrical connection in the Diesel Particulate Filter Differential Pressure sensor circuit can also trigger this fault code.

Below are the possible fixes for the automobile fault code p2464, including inspecting wiring harness and connectors for damage.

  • To fix the automobile fault code p2464, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P2464 indicates a problem with the diesel particulate filter differential pressure sensor circuit.

The estimated repair time for this issue is 1.0 hour.

The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour. Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.

The P2464 code is an OBDII code that is set when the Diesel Particulate Filter Differential Pressure sensor is out of factory specifications.

The Powertrain Control Module (PCM) monitors this sensor. The code indicates that the Diesel Particulate Filter Differential Pressure is too low on the bank.

This fault code is related to the diesel particulate filter system, which is responsible for reducing emissions from diesel engines. If this code is not addressed, it can lead to decreased engine performance and increased emissions.

It is important to have this issue diagnosed and repaired by a qualified mechanic as soon as possible.

What are the possible causes of the automobile fault code P2464?

If you see the engine light on or the service engine soon warning light, it could be due to the P2464 fault code. This code is usually caused by a faulty diesel particulate filter differential pressure sensor, an open or shorted harness, or a poor electrical connection in the sensor circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors for the P2464 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to the P2464 fault code, you may need to visually inspect the related wiring harness and connectors. This is because the cause of the issue could be a faulty Diesel Particulate Filter Differential Pressure sensor, an open or shorted harness, or a poor electrical connection. To fix the problem, check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the steps to take if I find broken, bent, pushed out, or corroded connector’s pins for the P2464 fault code?

If you encounter broken, bent, pushed out, or corroded connector’s pins for the P2464 fault code, follow these steps: Check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components. It’s important to check for broken, bent, pushed out, or corroded connector’s pins.

p2464 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Diesel Particulate Filter Differential Pressure sensor, open or shorted harness, or poor electrical connection. Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top