The P2446 fault code in automobiles refers to a problem with the secondary air injection system. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this issue could be a faulty air pump fuse, vacuum hose, air pump assembly, pressure sensor, or poor electrical connections.
It is important to address this issue promptly as it can lead to increased emissions and decreased fuel efficiency.
The repair time for this fault code is estimated to be around 1.0 hour. To fix the issue, one should visually inspect the related wiring harness and connectors and check for damaged components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P2446: Signs Of A Clogged Secondary Air Injection System
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2446 fault code. Here are the symptoms to look out for:
- The P2446 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, engine stalling, rough idling, and decreased fuel efficiency.
- Additionally, the vehicle may emit unusual noises or vibrations, and the exhaust system may produce excessive smoke or emissions.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
P2446: What’s Triggering It?
The automobile fault code p2446 can be caused by various factors, including…
- The automobile fault code P2446 can be caused by various factors such as a blown air pump fuse, a damaged vacuum hose, a faulty air pump assembly, a defective pressure sensor, an open or shorted air pump harness, a poor electrical connection in the air pump circuit, an open or shorted pressure sensor harness, and a poor electrical connection in the pressure sensor circuit.
Fix Code P2446: Simple Steps To Clear The Error
To fix the p2446 automobile fault code, check the possible causes and inspect related components for damage or corrosion.
- To fix the automobile fault code p2446, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2446: Affordable Fix For Complex Automobile Fault Code
The automobile fault code P2446 is related to the secondary air injection system.
The diagnosis and fixing cost of this fault code is influenced by several factors. The estimated repair time for this fault code is 1.0 hour.
The cost of repair is commonly charged between $75 and $150 per hour by most auto repair shops. The cost may also vary depending on the severity of the issue and the type of vehicle. It is important to get the fault code diagnosed and fixed as soon as possible to avoid further damage and costly repairs.
P2446: Your Car’s Exhaust System Needs Urgent Attention
The P2446 code refers to a malfunction in the secondary air injection system.
The system pumps secondary air to the exhaust manifold to activate the catalyst when warming up the engine. The air is supplied by the air pump and pumped to the exhaust manifold through the air switching valve. The ECM monitors the system and detects malfunction using a pressure sensor located on the air switching valve.
The code indicates that the secondary air injection system pump is stuck on bank.
FAQ
If you see the engine light on or service engine soon warning light, it could be due to the P2446 fault code. This code is usually caused by a faulty air pump fuse, vacuum hose, air pump assembly, or a faulty pressure sensor. It could also be due to an open or shorted air pump harness or poor electrical connection in the air pump circuit or pressure sensor circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P2446 fault code in your car, which is indicated by the engine light being on, you can fix it by checking the possible causes such as the air pump fuse, vacuum hose, air pump assembly, faulty pressure sensor, air pump harness, and pressure sensor harness. Inspect the related wiring harness and connectors for any damage or corrosion. Look for broken, bent, pushed out, or corroded connector’s pins.
To fix the P2446 fault code, it is necessary to visually inspect the related wiring harness and connectors. This is because the fault code can be caused by an open or shorted air pump harness, poor electrical connection in the air pump circuit, or an open or shorted pressure sensor harness. Checking for damaged components and inspecting the connectors for broken, bent, pushed out, or corroded pins can help identify and fix the issue.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to p2446. Check the possible causes such as the air pump fuse, vacuum hose, air pump assembly, faulty pressure sensor, and related wiring harness.
Inspect for damaged components and corroded connector’s pins.
