The P2306 fault code in automobiles indicates a problem with the ignition coil ‘C’. The engine light may turn on and the engine may run rough due to a faulty ignition coil or poor electrical connection in the circuit. It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this issue is estimated to be around 1.0. To interpret the fault code, one must check the possible causes listed above and look for any broken or bent components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P2306: Unstable Engine? Check These Symptoms Now!
If you’re experiencing an illuminated engine light and rough engine performance, read on to learn more about the symptoms of the p2306 automobile fault code.
- The P2306 fault code in an automobile can cause the following symptoms: the engine light will turn on or the service engine soon warning light will appear.
- The engine may start running rough, causing a noticeable decrease in performance.
- The vehicle may also experience a lack of power or acceleration.
- Additionally, the engine may misfire or stall, and there may be a noticeable decrease in fuel efficiency.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P2306: Ignition Coil ‘c’ Circuit Low – Common Culprits
P2306 fault code in automobiles can be caused by a faulty ignition coil, open or shorted harness, or poor electrical connection in the circuit.
- The automobile fault code P2306 can be caused by a faulty ignition coil ‘C’.
- It can also be caused by an open or shorted ignition coil ‘C’ harness.
- Additionally, a poor electrical connection in the ignition coil ‘C’ circuit can also trigger this fault code.
Fix Code P2306: Simple Steps To Get Your Car Running
To fix the p2306 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2306, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2306: Affordable Fix For Your Car’s Ignition System
The fault code P2306 indicates an issue with the ignition coil “C” primary circuit. The diagnosis process involves checking the wiring and connections related to the ignition coil, as well as testing the coil itself. The estimated repair time for this issue is 1.0 hour.
The cost of fixing this fault code will depend on the hourly rate of the auto repair shop, which typically ranges between $75 and $150 per hour. Other factors that may affect the cost include the location of the repair shop and the availability of replacement parts.
P2306: Ignition Coil ‘c’ Primary Control Circuit High
The P2306 code is related to the ignition system of the automobile.
It indicates a problem with the primary control circuit of ignition coil ‘C’. The Powertrain Control Module (PCM) controls the current flow through the primary ignition coil. The PCM detects a short to voltage in the circuit and sets the P2306 code.
This code can cause issues with the spark plug firing and should be addressed promptly.
FAQ
If you’re experiencing a rough running engine and the engine light is on, it could be due to the P2306 fault code. This code is often caused by a faulty ignition coil ‘C’, an open or shorted harness, or a poor electrical connection in the ignition coil circuit. To fix the issue, it’s recommended to visually inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.
To fix the P2306 fault code, start by checking the possible causes, which include a faulty ignition coil ‘C’, an open or shorted harness, or a poor electrical connection. To visually inspect the related wiring harness and connectors, look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This can help identify and fix the issue causing the engine light to turn on and the engine to run rough.
The P2306 fault code is indicated by the Engine Light ON or Service Engine Soon Warning Light and a possible rough engine running. The cause of this fault code could be a faulty Ignition Coil ‘C’, an open or shorted harness, or a poor electrical connection in the Ignition Coil ‘C’ circuit. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light and the engine is running rough, it could be due to a faulty Ignition Coil ‘C’, open or shorted harness, or poor electrical connection.
Check the wiring harness and connectors for damage and inspect the components for any issues.
