[SOLVED] P2251 Code: Fixing Negative Current Circuit In O2 Sensor

The P2251 fault code in automobiles indicates a problem with the front oxygen sensor bank 1. The most common symptom is the illumination of the engine light or service engine soon warning light.

The cause of this fault code could be a faulty front oxygen sensor bank 1, an open or shorted harness, or a poor electrical connection in the circuit. It is important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, one should check the possible causes listed above and inspect the related components thoroughly.

Repair Importance Level6.67 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2251 fault code.

Here are the symptoms to look out for:

  • The P2251 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include a decrease in engine power, poor fuel economy, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience a decrease in acceleration, misfires, and a decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code p2251 can be caused by a faulty front oxygen sensor, open or shorted harness, or poor electrical connection.

  • The automobile fault code P2251 can be caused by a faulty front oxygen sensor in bank 1.
  • It can also be caused by an open or shorted harness in the front oxygen sensor bank 1.
  • Additionally, a poor electrical connection in the front oxygen sensor bank 1 circuit can also trigger this fault code.

To fix the p2251 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p2251, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2251 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosing and fixing the P2251 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time.

The P2251 code refers to a fault in the O2 Sensor Negative Current Control Circuit Open Bank 1 S.

The Front Oxygen Sensor (O2 Sensor 1) is responsible for detecting the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 generates voltage from approximately 1V in richer conditions to 0V in leaner conditions, and its signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio, which occurs near the radical change from 1V to 0V.

What are the possible causes of the P2251 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2251 fault code. This code is caused by a faulty front oxygen sensor in Bank 1, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P2251 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P2251 fault code, there are a few things you can do to fix it. Firstly, check the possible causes listed above, which include a faulty Front Oxygen Sensor Bank 1, an open or shorted harness, or a poor electrical connection. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the signs that the Front Oxygen Sensor Bank 1 harness is open or shorted, causing the P2251 fault code?

If the Front Oxygen Sensor Bank 1 harness is open or shorted, it can cause the P2251 fault code, which triggers the Engine Light ON or Service Engine Soon Warning Light. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p2251 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Front Oxygen Sensor Bank 1, an open or shorted harness, or poor electrical connection. Check the wiring harness and connectors for damage, broken, bent, pushed out, or corroded pins.

Scroll to Top