The P2243 fault code in automobiles indicates a problem with the front oxygen sensor bank 1. The most common symptom is the illumination of the engine light or service engine soon warning light.

The cause of this fault code could be a faulty front oxygen sensor bank 1, an open or shorted harness, or a poor electrical connection in the circuit. It is important to visually inspect the related wiring harness and connectors for any damage or corrosion. The repair time for this fault code is estimated to be around 1.0 hour.

To interpret the fault code, one should check the possible causes listed above and look for any broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level6.67 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of p2243 fault code. Here are the symptoms to look out for:

  • The P2243 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include a decrease in engine power, poor fuel economy, rough idling, and difficulty starting the engine.
  • Additionally, the vehicle may experience stalling or misfiring, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

There are several causes of the automobile fault code p2243, including a faulty front oxygen sensor and poor electrical connection.

  • The automobile fault code P2243 can be caused by a faulty front oxygen sensor in bank 1.
  • It can also be caused by an open or shorted front oxygen sensor bank 1 harness.
  • Additionally, a poor electrical connection in the front oxygen sensor bank 1 circuit can also trigger this fault code.

To fix the p2243 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p2243, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2243 indicates a problem with the oxygen sensor circuit in Bank 1 Sensor 1.

The diagnosis involves checking the wiring and connections of the sensor and the engine control module.

The fixing cost is influenced by the estimated repair time, which is 1.0 hour.

Most auto repair shops charge between $75 and $150 per hour, which affects the overall cost of fixing the fault code.

The P2243 code indicates a problem with the O2 Sensor Reference Voltage Circuit Open Bank 1 Sensor 1.

This sensor is located in the exhaust manifold and detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The signal from this sensor is sent to the Engine Control Module (ECM), which adjusts the injection pulse duration to achieve the ideal air-fuel ratio.

If the O2 Sensor Reference Voltage Circuit is open, the ECM cannot receive the signal from the sensor, and the engine may run poorly or not at all.

It is important to have this issue diagnosed and repaired as soon as possible to avoid further damage to the engine.

What are the possible causes of the P2243 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2243 fault code. This code is caused by a faulty front oxygen sensor in Bank 1, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P2243 fault code?

If you’re experiencing the P2243 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Front Oxygen Sensor Bank 1, an open or shorted Front Oxygen Sensor Bank 1 harness, or a poor electrical connection in the Front Oxygen Sensor Bank 1 circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the consequences of ignoring the P2243 fault code and not fixing it in time?

Ignoring the P2243 fault code, caused by a faulty front oxygen sensor or related wiring issues, can lead to decreased fuel efficiency, engine damage, and increased emissions. The engine light will remain on, indicating a problem, and the vehicle may fail emissions tests. It is important to visually inspect the wiring harness and connectors and check for damaged components to avoid further damage.

p2243 error fault code explained

If your engine light is on, it could be due to a faulty front oxygen sensor bank 1, an open or shorted harness, or poor electrical connection.

Visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out connector pins.

Scroll to Top