The P2184 fault code in automobiles indicates a problem with the engine’s cooling system. The most common symptom is the illumination of the engine light or service engine soon warning light. The possible causes include low coolant level, a faulty engine coolant temperature sensor, a stuck or leaking thermostat, or poor electrical connections.

It is important to address this issue promptly as it can lead to engine overheating and damage. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour.

To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2184 fault code.

Here are the symptoms to look out for:

  • The P2184 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include the engine running rough or stalling, reduced power or acceleration, poor fuel economy, and overheating.
  • Additionally, the vehicle may experience coolant leaks, low coolant levels, or a malfunctioning thermostat.
  • It is important to address these symptoms promptly to prevent further damage to the engine and ensure safe driving conditions.

P2184 fault code in automobiles can be caused by various factors such as low coolant level, faulty engine coolant temperature sensor, and more.

  • The automobile fault code P2184 can be caused by a low coolant level.
  • It can also be caused by a faulty engine coolant temperature sensor.
  • Another cause of this fault code is a stuck or leaking thermostat.
  • Additionally, the engine coolant temperature sensor harness being open or shorted can cause this fault code.
  • Lastly, a poor electrical connection in the engine coolant temperature sensor circuit can also be a cause of the P2184 fault code.

To fix the p2184 automobile fault code, check the possible causes and inspect related components for damage or corrosion.

  • To fix the automobile fault code p2184, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2184 indicates a problem with the engine coolant temperature sensor. The estimated repair time for this issue is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.

Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.

P2184 is an automobile fault code that indicates a problem with the Engine Coolant Temperature (ECT) sensor 2. The ECT sensor 2 is a thermistor attached to the radiator that measures the engine coolant temperature.

If the ECT sensor 2 output voltage is less than a set value when the engine coolant temperature is high, the PCM detects a malfunction and a DTC is stored. This results in the P2184 code being displayed.

What are the possible causes of the P2184 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2184 fault code. This code is usually caused by low coolant level, a faulty engine coolant temperature sensor, a stuck or leaking thermostat, or a poor electrical connection in the engine coolant temperature sensor circuit. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for any damaged components or corroded connector pins.

How can I fix the P2184 automobile fault code?

If you’re experiencing the P2184 fault code, which is indicated by the engine light turning on, it could be due to a low coolant level, a faulty engine coolant temperature sensor, a stuck or leaking thermostat, or a poor electrical connection in the engine coolant temperature sensor circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

What should I visually inspect to troubleshoot the P2184 automobile fault code?

If you’re experiencing the P2184 fault code, you may notice that your engine light is on. The cause of this issue could be a low coolant level, a faulty engine coolant temperature sensor, a stuck or leaking thermostat, or a poor electrical connection in the engine coolant temperature sensor circuit. To troubleshoot this issue, visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

p2184 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to low coolant level, a faulty Engine Coolant Temperature Sensor, a stuck or leaking thermostat, or a poor electrical connection.

Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top