The P2165 fault code in automobiles refers to a problem with the Electronic Throttle Control (ETC) system. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light, along with no response from the throttle pedal.
The cause of this issue could be a faulty ETC, an open or shorted ETC harness, a poor electrical connection in the ETC sensor circuit, or a faulty Powertrain Control Module (PCM).
The importance of repairing this issue lies in the fact that it affects the drivability of the vehicle. The repair difficulty is moderate, with a repair time of 1.0 hour.
To fix the issue, one must visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P2165: Uncovering The Symptoms Of A Faulty Throttle Pedal
If you’re experiencing an illuminated engine light and a lack of throttle pedal response, read on to learn more about the symptoms of the p2165 automobile fault code.
- The automobile fault code P2165 has two main symptoms.
- The first symptom is that the engine light turns on.
- The second symptom is that there is no response from the throttle pedal.
P2165: Uncovering The Culprits Behind The Fault Code
The automobile fault code p2165 can be caused by a faulty ETC, open or shorted ETC harness, poor electrical connection in ETC sensor circuit, or a faulty PCM.
- The automobile fault code P2165 can be caused by a faulty Electronic Throttle Control (ETC).
- It can also be caused by an open or shorted Electronic Throttle Control (ETC) harness.
- Another cause of this fault code is a poor electrical connection in the Electronic Throttle Control (ETC) Sensor circuit.
- Lastly, a faulty Powertrain Control Module (PCM) can also cause the P2165 fault code.
Fix Code P2165: Quick Solutions For Your Car
To fix the p2165 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2165, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2165: Affordable Fix For Complex Auto Fault
The automobile fault code P2165 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosing and fixing the P2165 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
P2165: Your Engine’s Throttle Position Sensor Needs Attention
The P2165 code is related to the electronic throttle of a vehicle. It indicates that the throttle plate is not able to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. This fault code is triggered when the Powertrain Control Module (PCM) detects that the throttle plate is not functioning properly.
The code specifically refers to the ThrottlePedal Position Sensor ‘C’ Maximum Stop Performance. If left unaddressed, this issue can lead to poor engine performance and reduced fuel efficiency. It is important to have this issue diagnosed and repaired by a qualified mechanic as soon as possible to avoid further damage to the vehicle.
FAQ
If you’re experiencing an illuminated engine light or service engine soon warning light, along with no throttle pedal response, the possible cause could be a faulty Electronic Throttle Control (ETC), an open or shorted ETC harness, a poor electrical connection in the ETC sensor circuit, or a faulty Powertrain Control Module (PCM). To fix the issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector pins.
If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light, along with no throttle pedal response, it could be due to a faulty Electronic Throttle Control (ETC) or a poor electrical connection in the ETC Sensor circuit. It’s also possible that the ETC harness is open or shorted, or that the Powertrain Control Module (PCM) is faulty. To fix the issue, visually inspect the related wiring harness and connectors, and check for damaged components or corroded connector pins.
To visually inspect the wiring harness and connectors related to the P2165 fault code, first check for the listed possible causes, including a faulty Electronic Throttle Control (ETC), open or shorted ETC harness, poor electrical connection in the ETC Sensor circuit, or a faulty Powertrain Control Module (PCM). Then, visually inspect the related wiring harness and connectors for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If you experience an Engine Light ON or Service Engine Soon Warning Light with no throttle pedal response, it may be due to a faulty Electronic Throttle Control (ETC), an open or shorted ETC harness, poor electrical connection in the ETC Sensor circuit, or a faulty Powertrain Control Module (PCM). To fix the issue, visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
