The P2164 automobile fault code is a common issue that can cause the engine light to turn on and result in no throttle pedal response. The cause of this problem is often due to a faulty Electronic Throttle Control (ETC), an open or shorted ETC harness, or a poor electrical connection in the ETC sensor circuit.
It can also be caused by a faulty Powertrain Control Module (PCM).
The importance of repairing this issue is crucial as it can affect the performance of the vehicle. The repair difficulty is moderate, and it takes approximately 1.0 hour to fix.
To interpret the fault code, it is recommended to check the possible causes listed above and visually inspect the related wiring harness and connectors.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P2164: Identifying Faulty Fuel Injector Symptoms
If you’re experiencing an illuminated engine light and a lack of throttle pedal response, read on to learn more about the symptoms of the p2164 automobile fault code.
- The automobile fault code P2164 has two main symptoms.
- The first symptom is that the engine light turns on.
- The second symptom is that there is no response from the throttle pedal.
- These symptoms are important to note as they can indicate a problem with the throttle position sensor or the wiring associated with it.
- It is important to address this issue as soon as possible to prevent further damage to the vehicle.
P2164: Fuel Injector Group A Supply Voltage Circuit – Causes
The automobile fault code p2164 can be caused by a faulty ETC, open or shorted ETC harness, poor electrical connection in ETC sensor circuit, or a faulty PCM.
- The automobile fault code P2164 can be caused by a faulty Electronic Throttle Control (ETC).
- It can also be caused by an open or shorted Electronic Throttle Control (ETC) harness.
- Another cause of this fault code is a poor electrical connection in the Electronic Throttle Control (ETC) Sensor circuit.
- Lastly, a faulty Powertrain Control Module (PCM) can also cause the P2164 fault code.
Fix Code P2164: Quick Solutions For Your Car
To fix the p2164 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code p2164, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2164: Affordable Fix For Your Car’s Fuel Injector System
The fault code P2164 indicates a problem with the throttlepedal position sensorswitch E circuit.
The estimated repair time for this fault code is 1.0 hour. The cost of fixing this fault code is influenced by the hourly rate charged by the auto repair shop, which is typically between $75 and $150 per hour.
Other factors that may affect the cost include the severity of the problem, the type of vehicle, and the availability of replacement parts.
P2164: Fuel Injector Group ‘a’ Supply Voltage Circuit/Open
The P2164 code is related to the electronic throttle of a vehicle.
It indicates that the throttle plate is not able to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. This code is set by the Powertrain Control Module (PCM) when it monitors the electronic throttle. The code is specifically related to the ThrottlePedal Position Sensor ‘B’ Maximum Stop Performance.
If this code appears, it is important to have the vehicle inspected and repaired by a qualified mechanic to ensure proper functioning of the throttle system.
FAQ
If you’re experiencing an illuminated engine light or service engine soon warning light, along with no throttle pedal response, the fault code P2164 may be the culprit. This code is typically caused by a faulty Electronic Throttle Control (ETC), an open or shorted ETC harness, a poor electrical connection in the ETC sensor circuit, or a faulty Powertrain Control Module (PCM). To fix the issue, it’s recommended to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light, along with no throttle pedal response, it could be due to a faulty Electronic Throttle Control (ETC) or a poor electrical connection in the ETC Sensor circuit. It’s also possible that the ETC harness is open or shorted, or that the Powertrain Control Module (PCM) is faulty. To fix the issue, visually inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.
To visually inspect the wiring harness and connectors related to the P2164 fault code, first check for the possible causes listed above. Then, inspect the related wiring harness and connectors for any damaged components. Look for broken, bent, pushed out, or corroded connector’s pins. This will help identify if the Electronic Throttle Control (ETC) harness is open or shorted, or if the Electronic Throttle Control (ETC) Sensor circuit has a poor electrical connection.
Wrap Up
If you experience an Engine Light ON or Service Engine Soon Warning Light with no throttle pedal response, it may be due to a faulty Electronic Throttle Control (ETC), ETC harness issues, or a faulty Powertrain Control Module (PCM).
Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded connector’s pins.
