[SOLVED] P2157 Code: Fix High Voltage In Cylinder 4 Injector Circuit

The P2157 fault code in automobiles indicates a problem with Fuel Injector 4, which can cause the Engine Light to turn on. The possible causes of this issue include a faulty Fuel Injector 4, an open or shorted Fuel Injector 4 harness, a poor electrical connection in the Fuel Injector 4 circuit, or a faulty Engine Control Module (ECM).

The importance of repairing this issue lies in the fact that it can affect the performance of the engine. The repair difficulty is moderate, and it takes around 1.0 hour to fix.

To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2157 fault code. Here are the symptoms to look out for:

  • The P2157 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include a decrease in fuel efficiency, difficulty shifting gears, and a decrease in engine power.
  • Additionally, the vehicle may experience transmission slippage, harsh shifting, or even stalling.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

There are several causes of the automobile fault code p2157, including a faulty fuel injector, open or shorted harness, poor electrical connection, and a faulty ECM.

  • The automobile fault code P2157 can be caused by a faulty fuel injector 4.
  • It can also be caused by an open or shorted fuel injector 4 harness.
  • A poor electrical connection in the fuel injector 4 circuit can also trigger this fault code.
  • Lastly, a faulty engine control module (ECM) can also be a cause of the P2157 fault code.

Below are some possible fixes for the automobile fault code p2157, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p2157, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2157 indicates a problem with the vehicle’s speed sensor. The estimated repair time for this issue is 1.0 hour. The cost of fixing this problem can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.

Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.

The P2157 code is related to the high control circuit of the fuel injector in cylinder 4. The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits.

The ECM energizes each fuel injector by grounding the low control circuit of the fuel injector.

When the ECM detects that the fuel injector high voltage supply circuit is shorted to voltage for more than 2 seconds, the affected fuel injector(s) is disabled. This condition triggers the Diagnostic Trouble Code (DTC) and sets the P2157 code.

What are the possible causes of the P2157 automobile fault code?

If you’re experiencing the P2157 fault code, your engine light may be on. This could be due to a faulty fuel injector 4, an open or shorted fuel injector 4 harness, a poor electrical connection in the fuel injector 4 circuit, or a faulty engine control module (ECM). To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P2157 fault code?

If you’re experiencing the P2157 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few possible causes to consider. These include a faulty Fuel Injector 4, an open or shorted Fuel Injector 4 harness, a poor electrical connection in the Fuel Injector 4 circuit, or a faulty Engine Control Module (ECM). To fix the issue, start by visually inspecting the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

Is a faulty Engine Control Module (ECM) a common cause of the P2157 fault code?

While a faulty Engine Control Module (ECM) is listed as a possible cause of the P2157 fault code, it is not a common one. The most common cause is a faulty Fuel Injector 4, followed by issues with the fuel injector harness or poor electrical connections. To fix the issue, it is recommended to visually inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

p2157 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Fuel Injector 4, Fuel Injector 4 harness, poor electrical connection, or a faulty Engine Control Module (ECM). Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top