If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the P2136 fault code. This code indicates a problem with the Accelerator Pedal Position Sensor or Electric Throttle Control Actuator. The cause could be an open or shorted harness, poor electrical connection, or a faulty sensor or actuator.
It’s important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this fault code is estimated at 1.0, and it’s crucial to address the issue promptly to avoid further damage to your vehicle.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
P2136: Sudden Loss Of Power And Unresponsive Acceleration
If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, read on to learn about the symptoms of the p2136 automobile fault code.
- The P2136 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, hesitation or stalling while driving, difficulty starting the engine, and unresponsive accelerator pedal.
- Additionally, the vehicle may experience poor fuel economy, rough idling, or a decrease in overall performance.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P2136: Common Causes Of The Fault Code
P2136 fault code can be caused by various issues such as open harness, poor connection, or faulty sensors and actuators.
- The automobile fault code P2136 can be caused by various factors.
- These include an open or shorted Accelerator Pedal Position Sensor harness, a poor electrical connection in the Accelerator Pedal Position Sensor circuit, a faulty Accelerator Pedal Position Sensor, and a faulty Electric Throttle Control Actuator.
- It is important to identify and address these causes promptly to prevent further damage to the vehicle.
Fixing P2136: Simple Steps To Solve The Issue
To fix the p2136 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2136, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2136: Affordable Fix For Complex Automobile Fault Code
The fault code P2136 indicates a problem with the throttle or pedal position sensor.
The estimated repair time for this issue is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.
Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.
P2136: Throttle/Pedal Position Sensor/Switch ‘a’/’b’ Voltage Correlation
The P2136 code is related to the Accelerator Pedal Position (APP) sensor. The sensor has two pedal position signals, APP and APP2, which have a positive slope and increase at different rates. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals.
If the APP sensor inputs APP1 and APP2 disagree on the position of the accelerator pedal by more than an expected value, the P2136 code is set. This code indicates a ThrottlePedal Position SensorSwitch ‘AC’ Voltage Correlation issue.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P2136 fault code. This code is caused by an open or shorted Accelerator Pedal Position Sensor harness, poor electrical connection in the Accelerator Pedal Position Sensor circuit, a faulty Accelerator Pedal Position Sensor, or a faulty Electric Throttle Control Actuator. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P2136 fault code, there are a few things you can do to fix it. First, check the possible causes listed above, which include an open or shorted Accelerator Pedal Position Sensor harness, poor electrical connection in the Accelerator Pedal Position Sensor circuit, a faulty Accelerator Pedal Position Sensor, or a faulty Electric Throttle Control Actuator. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
The P2136 fault code is indicated by the Engine Light ON or Service Engine Soon Warning Light. It can be caused by an open or shorted Accelerator Pedal Position Sensor harness, poor electrical connection in the Accelerator Pedal Position Sensor circuit, or a faulty Electric Throttle Control Actuator. To fix it, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.
![p2136 error fault code explained](https://carmodnerd.com/wp-content/uploads/2023/06/P2136-error-fault-code.jpg)
Wrap Up
If your engine light is on and showing the P2136 code, it could be due to a faulty Accelerator Pedal Position Sensor or Electric Throttle Control Actuator. Check the wiring harness and connectors for any damage or corrosion.
Visually inspect the components and pins for any issues.