If you’re experiencing a lack of response from your throttle pedal and your engine light is on, it could be due to the P2132 fault code. This code indicates a problem with the Accelerator Pedal Position (APP) Sensor or its circuitry. The cause could be a faulty sensor, an open or shorted harness, or a poor electrical connection.
It’s important to address this issue promptly as it can affect your vehicle’s performance and fuel efficiency.
The repair difficulty is moderate, and it’s recommended to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time is estimated at 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
P2132: Sudden Loss Of Power In Your Vehicle
If you’re experiencing an illuminated engine light and a lack of throttle pedal response, read on to learn more about the symptoms of the p2132 automobile fault code.
- The automobile fault code P2132 has two main symptoms.
- The first symptom is that the engine light turns on or the service engine soon warning light appears.
- The second symptom is that there is no throttle pedal response.
Decoding P2132: Common Causes Of The Fault Code
The automobile fault code p2132 can be caused by a faulty sensor, poor electrical connection, or a faulty control module.
- The automobile fault code P2132 can be caused by a faulty Accelerator Pedal Position (APP) Sensor.
- It can also be caused by an open or shorted Accelerator Pedal Position (APP) Sensor harness.
- Another cause can be a poor electrical connection in the Accelerator Pedal Position (APP) Sensor circuit.
- Lastly, a faulty Powertrain Control Module (PCM) can also cause the P2132 fault code.
Fixing P2132: Simple Steps To Solve The Issue
To fix the p2132 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2132, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2132: Affordable Fix For Complex Automobile Fault Code
The fault code P2132 indicates a problem with the throttlepedal position sensorswitch. The diagnosis involves checking the wiring and connections, as well as testing the sensorswitch.
The estimated repair time for this issue is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.
Other factors that may influence the cost include the cost of replacement parts and any additional repairs that may be needed.
P2132: Throttle/Pedal Position Sensor/Switch ‘d’ Circuit Low
The P2132 code refers to a problem with the ThrottlePedal Position SensorSwitch ‘F’ Circuit. The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor, APP and APP2, which have a positive slope but are offset and increase at different rates.
If a concern is present with one of the circuits, the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees by the PCM, which is the input to the torque based strategy.
FAQ
If you’re experiencing an engine light on or service engine soon warning light, along with no throttle pedal response, the fault code P2132 may be the culprit. This code is often caused by a faulty Accelerator Pedal Position (APP) Sensor, an open or shorted APP Sensor harness, a poor electrical connection in the APP Sensor circuit, or a faulty Powertrain Control Module (PCM). To fix the issue, it’s recommended to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If your engine light is on and there is no throttle pedal response, it could be due to a faulty Accelerator Pedal Position (APP) Sensor or a related issue. One possible cause is an open or shorted APP Sensor harness. To identify this issue, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins. If any issues are found, they should be repaired or replaced accordingly.
If you’re experiencing an engine light on or service engine soon warning light, along with no throttle pedal response, it could be due to a faulty Accelerator Pedal Position (APP) Sensor, an open or shorted APP Sensor harness, a poor electrical connection in the APP Sensor circuit, or a faulty Powertrain Control Module (PCM). To fix this, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector pins.
Wrap Up
If you experience no throttle pedal response and the engine light is on, it may be due to a faulty Accelerator Pedal Position (APP) Sensor or a poor electrical connection.
Check the wiring harness and connectors for damage and inspect the components for any issues.
Also, check the Powertrain Control Module (PCM) for faults.
