The P2119 automobile fault code is a common issue that can cause the engine light to turn on and result in no throttle pedal response. This fault code is usually caused by a binding or bent throttle plate, faulty throttle body assembly, or poor electrical connection in the throttle body assembly circuit.
The importance of repairing this issue lies in the fact that it can cause the vehicle to stall or lose power while driving. The repair difficulty is moderate, and it takes approximately 1.0 hour to fix.
To interpret the fault code, one must check the possible causes listed above and visually inspect the related wiring harness and connectors.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
P2119: Unresponsive Throttle – Symptoms & Solutions
If you’re experiencing an illuminated engine light and a lack of throttle pedal response, read on to learn more about the symptoms of the p2119 automobile fault code.
- The automobile fault code P2119 has two main symptoms.
- The first symptom is the engine light turning on.
- The second symptom is the lack of response from the throttle pedal.
- When this fault code appears, the service engine soon warning light may also turn on.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding P2119: Common Causes Of Fault Code
P2119 fault code can be caused by various issues such as binding or bent throttle plate, faulty throttle body assembly, and more.
- The automobile fault code P2119 can be caused by a binding or bent throttle plate.
- It can also be caused by a faulty throttle body assembly or a throttle body assembly harness that is open or shorted.
- Additionally, a poor electrical connection in the throttle body assembly circuit can cause this fault code.
- Finally, a faulty engine control module (ECM) can also be the cause of the P2119 fault code.
Fix Code P2119: Simple Steps To Get Your Car Running
To fix the p2119 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2119, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2119: Affordable Fix For Complex Auto Fault Code
The automobile fault code P2119 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the P2119 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
P2119: Throttle Actuator Control Throttle Body Range/Performance
The P2119 code is related to the throttle position sensor in your car. It means that the throttle blade did not return to the rest position within 1 second.
This can cause issues with the engine’s performance and fuel efficiency. The Engine Control Module (ECM) monitors the duty cycle required to actuate the throttle valve.
The ECM determines the driver’s intent based on input from the accelerator pedal position sensors. The TP sensor information is transmitted between the throttle body and the ECM on the signalserial data circuit.
If you see the P2119 code, it’s important to have your car checked by a professional mechanic.
FAQ
If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, along with no throttle pedal response, the fault code P2119 may be the culprit. This code can be caused by a binding or bent throttle plate, faulty throttle body assembly, open or shorted throttle body assembly harness, poor electrical connection in the throttle body assembly circuit, or a faulty engine control module (ECM). To fix the issue, it’s recommended to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
To fix the P2119 fault code, start by checking the possible causes listed above. Then, visually inspect the related wiring harness and connectors for any damage or broken, bent, pushed out, or corroded pins. This will help identify any issues with the throttle body assembly harness being open or shorted, or poor electrical connections in the circuit.
While a faulty Engine Control Module (ECM) is listed as a possible cause of the P2119 fault code, it is not a common cause. The code is more likely to be triggered by a binding or bent throttle plate, faulty throttle body assembly, or poor electrical connection in the throttle body assembly circuit. To fix the issue, it is recommended to visually inspect the related wiring harness and connectors, and check for damaged components and connector pins.
Wrap Up
If you experience an Engine Light ON or Service Engine Soon Warning Light with no throttle pedal response, it could be due to a binding or bent Throttle Plate, faulty Throttle Body Assembly, or a poor electrical connection. Check the possible causes listed above, visually inspect the wiring harness and connectors, and look for damaged components or corroded pins.
