The P2117 fault code in automobiles refers to a problem with the ThrottlePedal Position Sensor, which can cause the Engine Light to turn on. The cause of this issue could be a faulty sensor, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can lead to reduced engine performance and even stalling.
The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.
The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
P2117: Unresponsive Throttle – Symptoms & Solutions
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2117 fault code. Here are the symptoms to look out for:
- The P2117 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, difficulty accelerating, and the engine stalling or shutting off unexpectedly.
- Additionally, the vehicle may experience problems with the throttle control system, such as the throttle not responding or the engine idling roughly.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P2117: Common Culprits
The automobile fault code p2117 can be caused by a faulty sensor, open or shorted harness, or poor electrical connection.
- The automobile fault code P2117 can be caused by a faulty Throttle/Pedal Position Sensor.
- It can also be caused by an open or shorted Throttle/Pedal Position Sensor harness.
- Additionally, a poor electrical connection in the Throttle/Pedal Position Sensor circuit can also trigger this fault code.
Fix Code P2117: Simple Steps To Get Your Car Running
To fix the p2117 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2117, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
- Ensure that everything is in good condition.
- The estimated repair time for this fix is 1.0 hour.
P2117: Affordable Fix For Complex Auto Fault Code
The automobile fault code P2117 indicates a problem with the throttle actuator control (TAC) system. The diagnosis and fixing cost of this fault code is influenced by several factors, including the estimated repair time, which is typically 1.0 hour. The cost of repair is also affected by the hourly rate charged by the auto repair shop, which can range from $75 to $150 per hour.
Other factors that may impact the cost include the severity of the issue, the type of vehicle, and the availability of replacement parts.
P2117: Throttle Actuator Control Motor Circuit – High Voltage
The P2117 code is a generic description for ThrottlePedal Position Sensor ‘F’ Minimum Stop Performance. However, the manufacturer may have a different description for your vehicle’s model and year. Unfortunately, we do not have any further information about this code at this time.
If you have any questions, please feel free to post them in the comments section below for more information.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P2117 fault code. This code is usually caused by a faulty throttle or pedal position sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the P2117 fault code, start by checking the possible causes listed above. To visually inspect the related wiring harness and connectors, look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues with the Throttle/Pedal Position Sensor harness and circuit connections, which could be causing the Engine Light to turn on.
If the Throttle/Pedal Position Sensor circuit has a poor electrical connection causing the P2117 fault code, the engine light or service engine soon warning light will turn on. This is due to a faulty Throttle/Pedal Position Sensor, an open or shorted harness, or a poor electrical connection. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and you have a P2117 code, it’s likely due to a faulty throttlepedal position sensor or a related wiring issue.
To fix it, visually inspect the wiring harness and connectors for damage and check for broken or corroded pins.
