The P2116 fault code in automobiles refers to a problem with the ThrottlePedal Position Sensor, which can cause the Engine Light to turn on.
This fault code can be caused by a faulty sensor, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can lead to reduced engine performance and even stalling.
The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
P2116: Unresponsive Throttle – Symptoms & Solutions
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2116 fault code. Here are the symptoms to look out for:
- The P2116 fault code in an automobile can cause several symptoms.
- These include the engine light turning on or the service engine soon warning light appearing.
- The vehicle may experience a reduction in power or acceleration, and the throttle may not respond properly.
- The engine may also stall or have difficulty starting.
- Additionally, the vehicle may have trouble shifting gears or experience transmission issues.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P2116: Culprits Behind Throttle Control System Malfunction
P2116 fault code can be caused by a faulty sensor, openshorted harness, or poor electrical connection.
- The automobile fault code P2116 can be caused by a faulty Throttle/Pedal Position Sensor.
- It can also be caused by an open or shorted Throttle/Pedal Position Sensor harness.
- Additionally, a poor electrical connection in the Throttle/Pedal Position Sensor circuit can also trigger this fault code.
Fix Code P2116: Simple Steps To Get Your Car Running
To fix the p2116 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2116, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
- Ensure that everything is in good condition.
- The estimated repair time for this fix is 1.0 hour.
P2116: Affordable Fix For Complex Auto Fault Code
The automobile fault code P2116 indicates a problem with the throttle actuator control system.
The diagnosis involves checking the wiring, connectors, and the throttle body itself. The estimated repair time for this fault code is 1.0 hour.
The cost of fixing this issue varies depending on the auto repair shop, but it is common for most shops to charge between $75 and $150 per hour. Therefore, the total cost of fixing the P2116 fault code can range from $75 to $150.
P2116: Throttle Actuator Control System – Forced Limited Power
The P2116 code is a generic description for ThrottlePedal Position Sensor ‘E’ Minimum Stop Performance. However, the manufacturer may have a different description for your vehicle’s model and year. Unfortunately, we do not have any further information about this code at this time.
If you have any questions, please feel free to post them in the comments section below for more information.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the p2116 fault code. This code is usually caused by a faulty throttle or pedal position sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing an engine light or service engine soon warning light with a P2116 fault code, it could be due to a faulty throttle/pedal position sensor, an open or shorted sensor harness, or a poor electrical connection. To fix this issue, start by visually inspecting the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
If the Throttle/Pedal Position Sensor circuit has a poor electrical connection, it can cause the p2116 fault code. This is indicated by the engine light turning on or the service engine soon warning light. To fix this issue, check for possible causes such as a faulty sensor or an open or shorted harness. Visually inspect the wiring harness and connectors for any damage or corrosion, and check for broken, bent, pushed out, or corroded connector pins.
Wrap Up
If your engine light is on and you have a P2116 code, it may be due to a faulty throttlepedal position sensor, an open or shorted harness, or poor electrical connection.
Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded connector pins.
