The P2113 fault code in automobiles refers to a problem with the ThrottlePedal Position Sensor, which can cause the Engine Light to turn on. The cause of this issue could be a faulty sensor, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can lead to reduced engine performance and even stalling.
The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
P2113: Unresponsive Throttle – Symptoms & Solutions
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2113 fault code. Here are the symptoms to look out for:
- The P2113 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include a decrease in engine power, difficulty starting the engine, and poor acceleration.
- The vehicle may also experience stalling or hesitation during acceleration, and the throttle may not respond properly.
- Additionally, the engine may idle roughly or stall when the vehicle is stopped.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P2113: Culprits Behind Throttle Actuator Control System High Airflow
The automobile fault code p2113 can be caused by a faulty sensor, open or shorted harness, or poor electrical connection.
- The automobile fault code P2113 can be caused by a faulty Throttle/Pedal Position Sensor.
- It can also be caused by an open or shorted Throttle/Pedal Position Sensor harness.
- Additionally, a poor electrical connection in the Throttle/Pedal Position Sensor circuit can also trigger this fault code.
Fix Code P2113: Simple Steps To Get Your Car Running
To fix the p2113 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code p2113, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2113: Affordable Fix For Complex Auto Fault
The automobile fault code P2113 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosing and fixing the P2113 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
P2113: Throttle/Pedal Position Sensor ‘b’ Minimum Stop Performance
The P2113 code is a generic description for ThrottlePedal Position Sensor ‘B’ Minimum Stop Performance. However, the manufacturer may have a different description for your specific vehicle. Unfortunately, we do not have any further information on this code at this time.
If you have any questions or concerns, please feel free to post them in the comments section below for more information.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P2113 fault code. This code is usually caused by a faulty throttle or pedal position sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the P2113 fault code in your automobile, you may notice that the engine light is on or the service engine soon warning light is illuminated. This issue is typically caused by a faulty throttle or pedal position sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix the problem, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the P2113 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Throttle/Pedal Position Sensor, an open or shorted Throttle/Pedal Position Sensor harness, or a poor electrical connection in the Throttle/Pedal Position Sensor circuit. To identify the cause, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and you have a P2113 code, it may be due to a faulty throttlepedal position sensor, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded connector pins.
