The P210D automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light. It is caused by a dirty throttle body, faulty Throttle Actuator Control Motor, or poor electrical connection in the Throttle Actuator Control Motor circuit.
The fault code can also be triggered by a faulty Engine Control Module (ECM).
The importance of repairing this issue lies in the fact that it can lead to poor engine performance and reduced fuel efficiency. The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time is estimated to be around 1.0 hour.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
P210D: Unresponsive Throttle – Symptoms & Fixes
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p210d fault code.
Here are the symptoms to look out for:
- The P210D fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, poor acceleration, and difficulty starting the engine.
- The vehicle may also experience stalling or rough idling, and the throttle may not respond properly.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
P210D: What Triggers This Auto Fault Code?
P210D fault code can be caused by various factors, including a dirty throttle body, faulty throttle actuator control motor, and more.
- The automobile fault code P210D can be caused by a dirty throttle body.
- It can also be caused by a faulty Throttle Actuator Control Motor or a Throttle Actuator Control Motor harness that is open.
- Poor electrical connection in the Throttle Actuator Control Motor circuit can also trigger this fault code.
- Another possible cause is a faulty Throttle Actuator Control Motor Relay.
- Lastly, a faulty Engine Control Module (ECM) can also be the reason behind the P210D fault code.
Fix Code P210D: Simple Steps To Get Your Car Running
To fix the p210d fault code, check the possible causes and inspect related wiring harness, connectors, and components for damage.
- To fix the automobile fault code p210d, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P210D: Affordable Fix For Your Car’s Throttle Control System
The fault code P210D indicates a malfunction in the electronic throttle control system.
The diagnosis involves checking the throttle body, wiring, and sensors. The estimated repair time for this fault code is 1.0 hour.
The cost of fixing this issue varies between $75 and $150 per hour, depending on the auto repair shop. Other factors that may affect the cost include the severity of the problem, the make and model of the vehicle, and the location of the repair shop.
P210D: Throttle Actuator Control Motor Circuit – Low
The P210D code refers to the throttle actuator ‘B’ control motor circuit being too high.
The throttle actuator is operated by the Engine Control Module (ECM) and controls the opening and closing of the throttle valve. The throttle control motor relay is ONOFF controlled by the ECM.
The throttle position sensor provides feedback to the ECM, allowing it to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.
When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM.
FAQ
If you’re experiencing the P210D fault code, your engine light may be on. This could be due to a dirty throttle body, faulty throttle actuator control motor, or a poor electrical connection in the throttle actuator control motor circuit. It could also be caused by a faulty throttle actuator control motor relay or engine control module. To fix the issue, check the possible causes listed above and visually inspect the wiring harness and connectors for any damage or corrosion.
If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P210D fault code, there are a few possible causes to consider. These include a dirty throttle body, faulty Throttle Actuator Control Motor, poor electrical connection in the Throttle Actuator Control Motor circuit, or a faulty Engine Control Module (ECM). To fix the issue, start by visually inspecting the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
A faulty Engine Control Module (ECM) is listed as a possible cause of the P210D fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light. However, it is not a common cause. Other possible causes include a dirty throttle body, faulty Throttle Actuator Control Motor, poor electrical connection, and a faulty Throttle Actuator Control Motor Relay. To fix the issue, inspect the related wiring harness and connectors for any damage or corrosion and check for broken or bent pins.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light due to the p210d fault code, check for dirty throttle body, faulty throttle actuator control motor, or poor electrical connection. Inspect the wiring harness and connectors for any damage or corrosion.
Look for broken, bent, pushed out, or corroded connector’s pins.