The P210C automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light. It is caused by a dirty throttle body, faulty Throttle Actuator Control Motor, or poor electrical connection in the Throttle Actuator Control Motor circuit.
The importance of repairing this issue lies in the fact that it affects the engine’s performance and fuel efficiency.
The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.
To interpret the fault code, one needs to check the “Possible Causes” listed above.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Unresponsive Throttle? P210C Could Be The Culprit
If you notice the engine light on or service engine soon warning light, it could be a sign of p210c fault code.
Here are the symptoms to look out for:
- The P210C fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and difficulty starting the engine.
- Additionally, the vehicle may experience decreased fuel efficiency, increased emissions, and a decrease in overall performance.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
P210C: What Triggers This Auto Fault Code?
The p210c automobile fault code can be caused by various factors, including a dirty throttle body and a faulty ECM.
- The automobile fault code P210C can be caused by a dirty throttle body.
- It can also be caused by a faulty Throttle Actuator Control Motor or a Throttle Actuator Control Motor harness that is open.
- Poor electrical connection in the Throttle Actuator Control Motor circuit can also cause this fault code.
- Another possible cause is a faulty Throttle Actuator Control Motor Relay.
- Lastly, a faulty Engine Control Module (ECM) can also trigger the P210C fault code.
Fix Code P210C: Simple Steps To Get Your Car Running
To fix the p210c automobile fault code, check the possible causes and inspect related components for damage or corrosion.
- To fix the automobile fault code p210c, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P210C: Affordable Fix For Your Car’s Throttle Control System
The fault code P210C is related to the throttle actuator control module. The diagnosis cost may vary depending on the auto repair shop, but it is usually included in the repair cost.
The estimated repair time for this fault code is 1.0 hour.
The fixing cost may range from $75 to $150 per hour, depending on the auto repair shop. The total cost of fixing the P210C fault code will depend on the hourly rate charged by the auto repair shop and the cost of any replacement parts needed.
P210C: Throttle Actuator Control Motor Current Range/Performance
The P210C code refers to the throttle actuator ‘B’ control motor circuit being low. The throttle actuator is operated by the Engine Control Module (ECM) and controls the opening and closing of the throttle valve.
The throttle control motor relay is controlled by the ECM and provides power supply to the throttle control motor. The throttle position sensor detects the opening angle of the throttle valve and provides feedback to the ECM.
The P210C code indicates that there is an issue with the circuit that controls the throttle actuator ‘B’ motor, causing it to operate at a low level. This can result in poor engine performance and reduced acceleration.
FAQ
If you’re experiencing the P210c fault code, your engine light may be on. This could be due to a dirty throttle body, faulty throttle actuator control motor, or a poor electrical connection in the throttle actuator control motor circuit. It could also be caused by a faulty throttle actuator control motor relay or engine control module. To fix the issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.
If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P210c fault code, there are several possible causes, including a dirty throttle body, faulty Throttle Actuator Control Motor, or a poor electrical connection in the Throttle Actuator Control Motor circuit. To fix the issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
A faulty Engine Control Module (ECM) is listed as one of the possible causes of the P210c fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light. Other possible causes include a dirty throttle body, faulty Throttle Actuator Control Motor, poor electrical connection, and a faulty Throttle Actuator Control Motor Relay. To fix the issue, it is recommended to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and the code is p210c, check for a dirty throttle body, faulty throttle actuator control motor, or poor electrical connections. Inspect the wiring harness and connectors for damage or corrosion. Look for broken, bent, or pushed out pins.
