The P210B automobile fault code is a common issue that triggers the Engine Light ON or Service Engine Soon Warning Light. It is caused by a dirty throttle body, faulty Throttle Actuator Control Motor, or poor electrical connection in the Throttle Actuator Control Motor circuit. The importance of repairing this issue lies in the fact that it affects the engine’s performance and fuel efficiency.

The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

To interpret the fault code, check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be a sign of p210b fault code.

Here are the symptoms to look out for:

  • The P210B fault code in an automobile can cause several symptoms.
  • These include the engine light turning on or the service engine soon warning light appearing.
  • The vehicle may experience reduced power or acceleration, and the engine may idle roughly or stall.
  • The throttle may also become unresponsive, and the vehicle may struggle to maintain a consistent speed.
  • Additionally, the transmission may shift roughly or erratically, and the fuel economy may decrease.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The p210b automobile fault code can be caused by various factors, including a dirty throttle body and a faulty ECM.

  • The automobile fault code P210B can be caused by a dirty throttle body.
  • It can also be caused by a faulty Throttle Actuator Control Motor or a Throttle Actuator Control Motor harness that is open.
  • Poor electrical connection in the Throttle Actuator Control Motor circuit can also cause this fault code.
  • Another possible cause is a faulty Throttle Actuator Control Motor Relay.
  • Finally, a faulty Engine Control Module (ECM) can also trigger the P210B fault code.

Below are some possible fixes for the automobile fault code p210b, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p210b, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P210B can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of diagnosis and fixing the P210B fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P210B code refers to the throttle actuator ‘B’ control motor circuit rangeperformance. The throttle actuator is operated by the Engine Control Module (ECM) and controls the opening and closing of the throttle valve.

The throttle control motor relay is ONOFF controlled by the ECM, and the opening angle of the throttle valve is detected by the throttle position sensor. The throttle position sensor provides feedback to the ECM, allowing it to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.

The P210B code indicates an issue with the throttle actuator ‘B’ control motor circuit, which may affect the performance of the throttle valve.

What are the possible causes of the P210b fault code?

If you’re experiencing the P210b fault code, your engine light may be on. This could be due to a dirty throttle body, faulty throttle actuator control motor, or a poor electrical connection in the throttle actuator control motor circuit. It could also be caused by a faulty throttle actuator control motor relay or engine control module. To fix the issue, check the possible causes listed above and visually inspect the wiring harness and connectors for any damage or corrosion.

How can I visually inspect the related wiring harness and connectors to fix the P210b fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P210b fault code, there are several possible causes, including a dirty throttle body, faulty Throttle Actuator Control Motor, or a poor electrical connection in the Throttle Actuator Control Motor circuit. To fix the issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Is a faulty Engine Control Module (ECM) a common cause of the P210b fault code?

A faulty Engine Control Module (ECM) is listed as one of the possible causes of the P210b fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light. Other possible causes include a dirty throttle body, faulty Throttle Actuator Control Motor, poor electrical connection, and a faulty Throttle Actuator Control Motor Relay. To fix the issue, it is recommended to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p210b error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light due to the p210b fault code, check the possible causes such as dirty throttle body, faulty throttle actuator control motor, and poor electrical connection. Inspect the wiring harness and connectors for any damage or corrosion.

Scroll to Top