[SOLVED] P2107 Code: Fix Your Throttle Control Module In Minutes

The P2107 fault code in automobiles refers to a problem with the Electronic Throttle Body (ETB) system.

The most common symptom of this issue is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this fault code could be a faulty ETB, an open or shorted ETB harness, poor electrical connection in the ETB circuit, or a faulty Powertrain Control Module (PCM).

The importance of repairing this issue lies in the fact that it can lead to reduced engine performance and fuel efficiency.

The repair difficulty is moderate, with a repair time of 1.0 hour.

To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	6.67 (Out of 10)

P2107: Unresponsive Throttle – Symptoms & Solutions

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2107 fault code. Here are the symptoms to look out for:

The P2107 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
Other symptoms may include reduced engine power, difficulty starting the engine, rough idling, stalling, and poor acceleration.
Additionally, the throttle may become unresponsive, and the vehicle may enter a “limp home” mode.
It is important to address these symptoms promptly to prevent further damage to the vehicle.

P2107: Culprits Behind The Fault Code

The automobile fault code p2107 can be caused by a faulty ETB, ETB harness, ETB circuit, or PCM.

The automobile fault code P2107 can be caused by a faulty Electronic Throttle Body (ETB).
It can also be caused by an open or shorted ETB harness.
Poor electrical connection in the ETB circuit can also trigger this fault code.
Lastly, a faulty Powertrain Control Module (PCM) can also be a cause of the P2107 fault code.

Fix P2107: Simple Steps To Solve The Issue

To fix the p2107 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

To fix the automobile fault code p2107, first, check the possible causes listed above.
Then, visually inspect the related wiring harness and connectors.
Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
This fix will take an estimated repair time of 1.0 hour.

P2107: Affordable Fix For Your Car’s Throttle Control System

The automobile fault code P2107 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of fixing the P2107 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to diagnose and fix the issue.

P2107: Throttle Actuator Control Module Processor – What You Need To Know

The P2107 code is related to the Throttle Actuator Control Module (TACM).

The TACM controls the electronic Throttle Actuator Control (TAC), which is a DC motor.

The TAC is controlled by the Powertrain Control Module (PCM). The P2107 code is set when the ETC control area of the PCM fails a test. This fault code could be the result of an incorrect Throttle Position (TP) command of the TACM.

FAQ

What are the possible causes of the P2107 fault code and how can they be identified?

If you’re experiencing the P2107 fault code, your engine light may be on. This could be due to a faulty Electronic Throttle Body (ETB), an open or shorted ETB harness, a poor electrical connection in the ETB circuit, or a faulty Powertrain Control Module (PCM). To identify the cause, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins.

How does a faulty Electronic Throttle Body (ETB) lead to the P2107 fault code and what steps can be taken to fix it?

If the engine light is on and the P2107 fault code is displayed, it could be due to a faulty Electronic Throttle Body (ETB). Other possible causes include an open or shorted ETB harness, poor electrical connection in the ETB circuit, or a faulty Powertrain Control Module (PCM). To fix the issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

Can a faulty Powertrain Control Module (PCM) be the sole cause of the P2107 fault code or are there other factors that need to be considered?

While a faulty Powertrain Control Module (PCM) can be a cause of the P2107 fault code, it is not the sole factor to consider. Other possible causes include a faulty Electronic Throttle Body (ETB), an open or shorted ETB harness, and poor electrical connections in the ETB circuit. To fix the issue, it is recommended to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Wrap Up

If your engine light is on and you have a P2107 code, it may be due to a faulty Electronic Throttle Body (ETB), an open or shorted ETB harness, a poor electrical connection in the ETB circuit, or a faulty Powertrain Control Module (PCM).

Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded connector pins.