The P20D7 fault code in automobiles indicates a problem with the Exhaust Aftertreatment Fuel Supply Control system. This issue is often identified by the illumination of the Engine Light or Service Engine Soon Warning Light.

The cause of this fault code could be a faulty Exhaust Aftertreatment Fuel Supply Control, an open or shorted harness, or a poor electrical connection in the circuit. The repair importance of this issue is high as it can lead to increased emissions and reduced fuel efficiency.

The difficulty level of repairing this issue is moderate, with a repair time of 1.0. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of the p20d7 fault code. Here are the symptoms to look out for:

  • The P20D7 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, and difficulty starting the engine.
  • Additionally, the vehicle may experience a decrease in acceleration or a loss of power while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P20d7 fault code can be caused by various issues such as faulty fuel supply control or poor electrical connection.

  • The automobile fault code P20D7 can be caused by a faulty Exhaust Aftertreatment Fuel Supply Control.
  • It can also be caused by an open or shorted Exhaust Aftertreatment Fuel Supply Control harness.
  • Additionally, a poor electrical connection in the Exhaust Aftertreatment Fuel Supply Control circuit can also trigger this fault code.

To fix the automobile fault code p20d7, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code P20D7, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P20D7 indicates an issue with the reductant heater control circuit.

The estimated repair time for this fault code is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for most shops to charge between $75 and $150 per hour.

Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.

The P20D7 code refers to a problem with the exhaust fuel addition injector assembly.

This assembly is responsible for adding fuel to the exhaust system based on signals from the Engine Control Module (ECM). The P20D7 code specifically relates to an issue with the exhaust aftertreatment fuel supply control circuit or O.

What are the possible causes of the P20D7 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P20D7 fault code. This code is caused by a faulty exhaust aftertreatment fuel supply control, an open or shorted harness, or a poor electrical connection in the exhaust aftertreatment fuel supply control circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P20D7 fault code?

If you’re experiencing the P20D7 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may need to visually inspect the related wiring harness and connectors. This fault code is caused by a faulty Exhaust Aftertreatment Fuel Supply Control, an open or shorted Exhaust Aftertreatment Fuel Supply Control harness, or a poor electrical connection in the Exhaust Aftertreatment Fuel Supply Control circuit. To fix this issue, check the possible causes listed above and visually inspect the related wiring harness and connectors for any damaged components or broken, bent, pushed out, or corroded connector’s pins.

What are the steps to take if I find damaged components or broken, bent, pushed out, or corroded connector’s pins while fixing the P20D7 fault code?

If you find damaged components or broken, bent, pushed out, or corroded connector’s pins while fixing the P20D7 fault code, follow these steps: visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. Check the “Possible Causes” listed above and ensure that the Exhaust Aftertreatment Fuel Supply Control harness is not open or shorted and that the Exhaust Aftertreatment Fuel Supply Control circuit has no poor electrical connection.

p20d7 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light with the P20D7 fault code, check the Exhaust Aftertreatment Fuel Supply Control. Inspect the wiring harness and connectors for damage, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top