If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P2087 fault code. This code indicates a problem with the Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 2. The possible causes include a faulty sensor, open or shorted harness, poor electrical connection, exhaust leaks, or excessive particulate matter buildup on the sensor.
The repair importance is high as it can affect the engine’s performance and fuel efficiency.
The repair difficulty is moderate, and it takes around 1.0 hour to fix.
To interpret the fault code, you need to check the possible causes and visually inspect the related wiring harness and connectors.
| Repair Importance Level | 3.33 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P2087: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2087 fault code. Here are the symptoms to look out for:
- The P2087 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
- Additionally, the vehicle may emit a strong odor of fuel or experience difficulty starting.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
P2087: Fuel Injector Circuit Low – Common Causes
The automobile fault code p2087 can be caused by a range of issues, including faulty sensors, poor electrical connections, and exhaust leaks.
- The automobile fault code P2087 can be caused by a faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 2.
- It can also be caused by an open or shorted Exhaust Gas Temperature Sensor Bank 2 Sensor 2 harness.
- Poor electrical connection in the Exhaust Gas Temperature Sensor Bank 2 Sensor 2 circuit can also trigger this fault code.
- Additionally, exhaust leaks and excessive particulate matter buildup on the sensor can cause the P2087 fault code.
Fix Code P2087: Quick Steps To Get Your Car Running
To fix the p2087 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2087, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- Ensure that all the connections are secure and free from corrosion.
- This repair should take approximately 1.0 hour.
P2087: Affordable Fix For Your Car’s Fuel System
The automobile fault code P2087 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of fixing the P2087 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
P2087: Fuel Injector Control Circuit Low – What You Need To Know
The P2087 code is related to the Exhaust Gas Temperature Sensor (EGTS) circuit. The EGTS is responsible for detecting exhaust gas temperature and converting it into a voltage signal. The PCM monitors the EGTS for proper circuit continuity and out of range high values.
If the EGTS is out of factory specifications, the PCM sets the P2087 OBDII code. This code specifically refers to an intermittent circuit issue in Bank 2 of the sensor.
FAQ
If you notice the engine light on or service engine soon warning light, it could be due to the P2087 fault code. This code is caused by a faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 2, an open or shorted harness, poor electrical connection, exhaust leaks, or excessive particulate matter buildup on the sensor. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to the P2087 fault code, it’s likely caused by a faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 2, an open or shorted harness, poor electrical connection, exhaust leaks, or excessive particulate matter buildup on the sensor. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P2087 fault code. This code is caused by a faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 2, open or shorted harness, poor electrical connection, exhaust leaks, or excessive particulate matter buildup on the sensor. To fix this issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 2, exhaust leaks, or excessive particulate matter buildup on the sensor. Check the wiring harness and connectors for damage and inspect the components for any issues.
