The P204F automobile fault code indicates a problem with the Emission Reduction Fluid Injector or the Reductant Pump Motor. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light.

The cause of this fault code could be a faulty injector, open or shorted harness, poor electrical connection, or a faulty pump motor.

The repair importance is high as it affects the vehicle’s emissions and performance.

The difficulty level of repair is moderate, and it takes approximately 1.0 hour to fix. To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors for any damage or corrosion.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p204f fault code.

Here are the symptoms to look out for:

  • The P204F fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code p204f can be caused by a faulty injector, harness issues, or a faulty pump motor.

  • The automobile fault code P204F can be caused by a faulty Emission Reduction Fluid Injector.
  • It can also be caused by an open or shorted Emission Reduction Fluid Injector harness.
  • Another cause can be a poor electrical connection in the Emission Reduction Fluid Injector circuit.
  • Lastly, a faulty Reductant Pump Motor can also trigger this fault code.

To fix the p204f automobile fault code, check the possible causes and inspect related components for damage or corrosion.

  • To fix the automobile fault code p204f, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P204F indicates a problem with the Reductant System Performance. The diagnosis and fixing cost of this fault code is influenced by several factors, including the estimated repair time of 1.0 hour. Most auto repair shops charge between $75 and $150 per hour, which can significantly impact the overall cost.

Other factors that may affect the cost include the severity of the issue, the type of vehicle, and the location of the repair shop. It is important to address this fault code promptly to avoid further damage and potential safety hazards.

The P204F code is related to the Reductant System Performance Bank 1. The Selective Catalytic Reduction (SCR) system reduces oxides of nitrogen (NOx) emissions. The ECM varies the amount of DEF added by varying the reductant injector duty cycle.

The ECM supplies system voltage to the reductant pump motor.

The ECM detects the reductant pressure did not reach a calibrated pressure after an initial attempt to build up pressure. If the ECM detects reductant pressure is still less than a calibrated threshold, a Diagnostic Trouble Code (DTC) is set.

What are the possible causes of the P204F fault code in an automobile?

If you see the engine light on or the service engine soon warning light, it could be due to the P204F fault code. This code is usually caused by a faulty emission reduction fluid injector, an open or shorted injector harness, a poor electrical connection in the injector circuit, or a faulty reductant pump motor. To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P204F fault code?

If you’re experiencing the P204F fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you can fix it by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This fault code can be caused by a faulty Emission Reduction Fluid Injector, an open or shorted Emission Reduction Fluid Injector harness, a poor electrical connection in the Emission Reduction Fluid Injector circuit, or a faulty Reductant Pump Motor.

What are the consequences of ignoring the P204F fault code in an automobile?

Ignoring the P204F fault code in an automobile can lead to serious consequences. The engine light will remain on, indicating a problem with the emission reduction fluid injector or its circuit. This can result in increased emissions, reduced fuel efficiency, and potential damage to the engine. It is important to check the possible causes listed above and visually inspect the related wiring harness and connectors to avoid further damage.

p204f error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Emission Reduction Fluid Injector, open or shorted harness, poor electrical connection, or faulty Reductant Pump Motor. Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top