The P1FC5 automobile fault code indicates a problem with the HybridEV Battery Interface Control Module, which can cause the engine light to turn on.

This fault code can be caused by a faulty module, an open or shorted harness, or poor electrical connections. It is important to address this issue promptly as it can affect the performance of the vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the possible causes listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be a sign of p1fc5 fault code. Here are the symptoms to look out for:

  • The P1FC5 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, and the driver may notice a decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1FC5 fault code can be caused by a faulty control module, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1FC5 can be caused by a faulty Hybrid/EV Battery Interface Control Module.
  • It can also be caused by an open or shorted Hybrid/EV Battery Interface Control Module harness.
  • Additionally, a poor electrical connection in the Hybrid/EV Battery Interface Control Module circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code p1fc5, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1fc5, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the automobile fault code P1FC5 are: – The estimated repair time is 1.0 hour. – Auto repair shops usually charge between $75 and $150 per hour. – The complexity of the issue and the required parts can also affect the cost.

– The expertise and experience of the mechanic can also impact the cost. – The location of the repair shop can also affect the cost due to varying labor rates.

The P1FC5 code refers to a fault in the HybridEV Battery Interface Control Module. This module monitors the voltage of the 96 battery cell groups in the hybrid battery assembly.

The fault is related to the 7.5 V reference circuit in the module.

The battery energy control module communicates diagnostics and system status to the hybrid powertrain control module 2 through serial data. The hybrid powertrain control module 2 is responsible for diagnostic trouble code information.

What are the possible causes of the P1FC5 automobile fault code?

If you’re experiencing the P1FC5 fault code, your engine light or service engine soon warning light may be on. This could be due to a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or poor electrical connection in the circuit. To fix the issue, check the possible causes listed above, visually inspect the wiring harness and connectors, and look for any damaged components or corroded connector pins.

How can I fix the P1FC5 automobile fault code?

If you’re experiencing the P1FC5 fault code, which is indicated by the engine light or service engine soon warning light turning on, it’s likely due to a faulty Hybrid/EV Battery Interface Control Module or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for broken, bent, or pushed out connector pins.

What should I visually inspect to troubleshoot the P1FC5 automobile fault code?

If you’re troubleshooting the P1FC5 automobile fault code, start by checking for an illuminated Engine Light or Service Engine Soon Warning Light. The cause of this issue could be a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or a poor electrical connection in the module circuit. To fix the problem, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins to ensure a proper electrical connection.

p1fc5 error fault code explained

If your engine light is on, it could be due to a faulty HybridEV Battery Interface Control Module, an open or shorted harness, or poor electrical connection. Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top