The P1FC0 automobile fault code indicates a problem with the HybridEV Battery Interface Control Module.

The most common symptom is the Engine Light ON or Service Engine Soon Warning Light. The cause of this issue could be a faulty HybridEV Battery Interface Control Module, an open or shorted harness, or a poor electrical connection.

It is important to address this issue promptly as it can affect the performance of the vehicle. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour.

To fix the problem, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. It is crucial to interpret the fault code correctly to ensure the proper repair is performed.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1fc0 fault code. Here are the symptoms to look out for:

  • The P1FC0 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, and the driver may notice a decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P1FC0 fault code can be caused by a faulty control module, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1FC0 can be caused by a faulty Hybrid/EV Battery Interface Control Module.
  • It can also be caused by an open or shorted Hybrid/EV Battery Interface Control Module harness.
  • Additionally, a poor electrical connection in the Hybrid/EV Battery Interface Control Module circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code p1fc0, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1fc0, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1FC0 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of diagnosis and fixing for the P1FC0 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The P1FC0 fault code is related to the HybridEV Battery Interface Control Module. This fault code is triggered when the module detects a fault condition within its own systems.

The fault is internal to the module and does not involve any external circuits. The code specifically refers to the HybridEV Battery Interface Control Module 8 Performa. If this fault code appears, it is important to have the module diagnosed and repaired by a qualified technician to ensure proper functioning of the vehicle’s hybrid or electric systems.

What are the possible causes of the P1FC0 automobile fault code?

If you’re experiencing the P1FC0 fault code, your engine light may be on. This could be due to a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P1FC0 automobile fault code?

If you’re experiencing the P1FC0 fault code, which is indicated by the engine light or service engine soon warning light turning on, it’s likely due to a faulty Hybrid/EV Battery Interface Control Module or an open/shorted harness or poor electrical connection. To fix this issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

What should I visually inspect to troubleshoot the P1FC0 automobile fault code?

If you’re experiencing the P1FC0 fault code, you may notice that your engine light is on. This could be due to a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or poor electrical connection. To troubleshoot this issue, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, or pushed out pins on the connectors. Be sure to address any issues found during the inspection to fix the problem.

p1fc0 error fault code explained

If your engine light is on, it may be due to a faulty HybridEV Battery Interface Control Module or related wiring issues. Visually inspect the wiring harness and connectors for damage or corrosion. Check for broken or bent pins.

Scroll to Top