If you see the engine light on or the service engine soon warning light, it could be due to the P1FB9 fault code.

This code indicates a problem with the HybridEV Battery Interface Control Module, which could be faulty or have a poor electrical connection. The wiring harness and connectors should be visually inspected for any damage or corrosion. The repair time for this fault code is estimated to be around 1.0.

It’s important to address this issue promptly to avoid further damage to your vehicle.

To interpret the fault code, you can use an OBD-II scanner or take your car to a mechanic.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1fb9 fault code. Here are the symptoms to look out for:

  • The P1FB9 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting problems, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P1FB9 fault code can be caused by issues with the HybridEV Battery Interface Control Module or its circuit connections.

  • The automobile fault code P1FB9 can be caused by a faulty Hybrid/EV Battery Interface Control Module.
  • It can also be caused by an open or shorted Hybrid/EV Battery Interface Control Module harness.
  • Additionally, a poor electrical connection in the Hybrid/EV Battery Interface Control Module circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code p1fb9, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1fb9, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1FB9 is a diagnostic trouble code related to the battery management system.

The estimated repair time for this fault code is 1.0 hour. The cost of fixing this fault code is dependent on the hourly rate charged by the auto repair shop.

The average hourly rate charged by most auto repair shops is between $75 and $150. Therefore, the cost of fixing the P1FB9 fault code can range from $75 to $150.

The P1FB9 fault code is related to the HybridEV Battery Interface Control Module. This fault code is triggered when the module detects a fault condition within its own systems.

The fault is internal to the module and does not involve any external circuits. The code specifically refers to a long-term memory performance issue within the module.

If this fault code is detected, it is important to have the module diagnosed and repaired by a qualified technician to ensure proper functioning of the hybrid or electric vehicle.

What are the possible causes of the P1FB9 fault code in an automobile?

If you’re experiencing the P1FB9 fault code in your automobile, it’s likely due to a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or poor electrical connection. The engine light may be on as a result. To fix the issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

How can one visually inspect the wiring harness and connectors related to the Hybrid/EV Battery Interface Control Module?

If you’re experiencing an Engine Light ON (or Service Engine Soon Warning Light) due to a faulty Hybrid/EV Battery Interface Control Module, you can visually inspect the related wiring harness and connectors to fix the issue. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify if the Hybrid/EV Battery Interface Control Module harness is open or shorted, or if the Hybrid/EV Battery Interface Control Module circuit has a poor electrical connection.

What are the consequences of ignoring the P1FB9 fault code in an automobile?

Ignoring the P1FB9 fault code in an automobile, which indicates a faulty Hybrid/EV Battery Interface Control Module, can lead to serious consequences. The engine light will remain on, and the vehicle may experience reduced performance and fuel efficiency. It is crucial to address the issue promptly by visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

p1fb9 error fault code explained

If you see the Engine Light ON, it could be due to a faulty HybridEV Battery Interface Control Module, an open or shorted harness, or poor electrical connection.

Check the wiring harness and connectors for damage, broken, bent, pushed out, or corroded pins.

Scroll to Top