If you see the engine light on or the service engine soon warning light, it could be due to the P1FAF fault code. This code indicates a problem with the HybridEV Battery Interface Control Module, which could be faulty or have a poor electrical connection.

The harness may also be open or shorted. It’s important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this fault code is 1.0, and it’s crucial to fix the issue to avoid further damage to the vehicle.

To interpret the fault code, you can use an OBD-II scanner or take your car to a mechanic.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be a sign of p1faf fault code.

Here are the symptoms to look out for:

  • The P1FAF fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light, reduced engine power, engine stalling, rough idling, poor acceleration, decreased fuel efficiency, and difficulty starting the engine.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P1FAF fault code can be caused by issues with the HybridEV Battery Interface Control Module or its circuit connections.

  • The automobile fault code P1FAF can be caused by a faulty Hybrid/EV Battery Interface Control Module.
  • It can also be caused by an open or shorted Hybrid/EV Battery Interface Control Module harness.
  • Additionally, a poor electrical connection in the Hybrid/EV Battery Interface Control Module circuit can also trigger this fault code.

To fix the p1faf automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code p1faf, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1FAF has an estimated repair time of 1.0 hour. The cost of fixing this code varies between $75 and $150 per hour, depending on the auto repair shop.

The diagnosis and fixing cost may also depend on the severity of the issue, the type of vehicle, and the location of the repair shop.

It is important to get an accurate diagnosis and estimate from a trusted mechanic before proceeding with any repairs.

The P1FAF fault code is related to the HybridEV Battery Interface Control Module. It is a diagnostic code that indicates a fault condition within the module’s internal microprocessor integrity. This fault is internal to the module and does not involve any external circuits.

The specific issue identified by the P1FAF code is related to the module’s Read Only Memory performance.

If this fault code is detected, it is important to have the HybridEV Battery Interface Control Module inspected and repaired by a qualified technician.

What are the possible causes of the P1FAF fault code?

If you’re experiencing the P1FAF fault code, your engine light may be on. This could be due to a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or poor electrical connection in the circuit. To fix the issue, check the possible causes listed above, visually inspect the wiring harness and connectors, and look for any damaged components or broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the related wiring harness and connectors to fix the P1FAF fault code?

If you’re experiencing the P1FAF fault code, which is indicated by the engine light or service engine soon warning light being on, there are a few things you can do to fix it. The cause of this issue could be a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or a poor electrical connection. To address these potential causes, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What are the damaged components that I should look for when fixing the P1FAF fault code?

If you’re dealing with the P1FAF fault code, you should check for a faulty Hybrid/EV Battery Interface Control Module, an open or shorted Hybrid/EV Battery Interface Control Module harness, or a poor electrical connection in the Hybrid/EV Battery Interface Control Module circuit. To fix the issue, visually inspect the related wiring harness and connectors, and check for damaged components such as broken, bent, pushed out, or corroded connector pins.

p1faf error fault code explained

If your engine light is on, it could be due to a faulty HybridEV Battery Interface Control Module or related wiring issues. Check for damaged components and inspect the wiring harness and connectors for any issues.

Scroll to Top