The P1F64 automobile fault code indicates a problem with the Power Inverter Module, which can cause the engine light to turn on.

The cause of this issue could be a faulty module, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can affect the performance of the vehicle.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1f64 fault code.

Here are the symptoms to look out for:

  • The P1F64 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1F64 automobile fault code can be caused by a faulty power inverter module, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1F64 can be caused by a faulty Power Inverter Module.
  • It can also be caused by an open or shorted Power Inverter Module harness.
  • Additionally, a poor electrical connection in the Power Inverter Module circuit can also trigger this fault code.

Below are the possible fixes for the automobile fault code p1f64, including inspecting wiring harness, connectors, and damaged components.

  • To fix the automobile fault code P1F64, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1F64 has an estimated repair time of 1.0 hour. The cost of fixing this fault code varies between $75 and $150 per hour, depending on the auto repair shop.

The cost may also vary based on the severity of the issue and the type of vehicle. It is important to consider all these factors when estimating the total cost of fixing the P1F64 fault code.

The P1F64 fault code is an internal fault detection of the power inverter module.

It is also known as the drive motor generator power inverter module. This fault is handled inside the power inverter module, and no external circuits are involved. The P1F64 fault code indicates a HybridEV System Voltage Discharge Circuit Low Voltage.

This means that the voltage in the system is lower than it should be, which can cause issues with the vehicle’s performance. If you receive the P1F64 fault code, it is important to have it diagnosed and repaired as soon as possible.

Ignoring this fault can lead to further damage to the vehicle and potentially more expensive repairs down the line.

What are the possible causes of the P1F64 automobile fault code?

If your engine light is on and you’re seeing the P1F64 fault code, it could be due to a faulty Power Inverter Module, an open or shorted harness, or poor electrical connection in the module circuit. To fix this, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1F64 fault code?

If you’re experiencing the P1F64 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Power Inverter Module or a poor electrical connection in the Power Inverter Module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. It’s important to check the possible causes listed above to ensure that you’re addressing the root of the problem.

What are the consequences of ignoring the P1F64 fault code and not fixing it in a timely manner?

Ignoring the P1F64 fault code, which indicates a faulty Power Inverter Module or related wiring issues, can lead to serious consequences. The engine light or service engine soon warning light will remain on, indicating a problem with the vehicle’s hybrid system. This can result in reduced fuel efficiency, decreased performance, and potential damage to other components. It is crucial to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components.

p1f64 error fault code explained

If your engine light is on, it could be due to a faulty power inverter module, an open or shorted harness, or poor electrical connection.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top