If you see the engine light on or the service engine soon warning light, it could be due to the P1F0B fault code.

This code indicates a problem with the AC compressor, such as a faulty compressor, an open or shorted compressor harness, or a poor electrical connection in the compressor circuit. It’s important to address this issue promptly to avoid further damage to your vehicle. The repair time for this fault code is estimated at 1.0, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1f0b fault code.

Here are the symptoms to look out for:

  • The P1F0B fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light, reduced engine power, engine stalling, rough idling, poor acceleration, decreased fuel efficiency, and difficulty starting the engine.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P1F0B automobile fault code can be caused by a faulty AC compressor, open or shorted AC compressor harness, or poor electrical connection in the AC compressor circuit.

  • The automobile fault code P1F0B can be caused by a faulty A/C compressor.
  • It can also be caused by an open or shorted A/C compressor harness.
  • Additionally, a poor electrical connection in the A/C compressor circuit can also trigger this fault code.

To fix the p1f0b automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1f0b, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1F0B has an estimated repair time of 1.0 hour.

The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of P1F0B will range between $75 and $150, depending on the repair time required.

The P1F0B code refers to the AC compressor motor start-up current performance. The AC compressor uses a 3-phase alternating current, high voltage electric motor to operate.

The HybridEV Powertrain Control Module 2 uses values from various sensors to determine the speed at which the compressor will operate. The AC compressor control module monitors an internal parameter known as the DC link current. The motor start-up procedure can take a variable length of time to run.

The length of time is dependent on external conditions such as under-bonnet temperature and high side pressure.

What are the possible causes of the P1F0B automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1F0B fault code. This code is usually caused by a faulty A/C compressor, an open or shorted A/C compressor harness, or a poor electrical connection in the A/C compressor circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1F0B fault code?

If you’re experiencing the P1F0B fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty A/C Compressor, an open or shorted A/C Compressor harness, or a poor electrical connection in the A/C Compressor circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify the root cause of the problem and take the necessary steps to resolve it.

What are the signs that the A/C Compressor circuit has a poor electrical connection, leading to the P1F0B fault code?

If you notice the engine light or service engine soon warning light is on, it could be a sign of a poor electrical connection in the A/C Compressor circuit, leading to the P1F0B fault code. This issue can be caused by a faulty A/C Compressor, an open or shorted A/C Compressor harness, or a poor electrical connection in the A/C Compressor circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p1f0b error fault code explained

If your engine light is on, it could be due to a faulty AC compressor, an open or shorted AC compressor harness, or a poor electrical connection in the AC compressor circuit.

To fix this issue, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top