[SOLVED] P1Eff Code: How To Fix Battery Charger Input Circuit Performance

The P1EFF fault code in automobiles indicates a problem with the battery charger system. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this issue could be a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

It is important to address this issue promptly as it can lead to further damage to the vehicle’s electrical system. The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The difficulty level of this repair is considered to be moderate, with an estimated repair time of 1.0 hour.

To interpret the fault code, it is recommended to check the possible causes listed above and inspect the related components thoroughly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1eff fault code. Here are the symptoms to look out for:

  • The P1EFF fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P1EFF automobile fault code can be caused by a faulty battery charger, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1EFF can be caused by a faulty battery charger.
  • It can also be caused by an open or shorted battery charger harness.
  • Additionally, a poor electrical connection in the battery charger circuit can also trigger this fault code.

To fix the p1eff automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code p1eff, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1EFF has an estimated repair time of 1.0 hour. The cost of fixing this code varies depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.

These factors are influential in determining the overall cost of diagnosing and fixing the P1EFF code.

The P1EFF code is a Diagnostic Trouble Code (DTC) for the battery charger.

It indicates that the battery charger is performing internal measurements to verify its proper functioning. The measurements include internal voltages, currents, and temperatures, which should be within the proper range.

The hybridEV powertrain control module 2 receives the diagnostics and system status from the battery charger through serial data. The P1EFF code specifically refers to the Battery Charger Input Power Up Protection Circuit Performance.

What are the possible causes of the P1EFF automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1EFF fault code. This code is usually caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1EFF fault code?

If you’re experiencing the P1EFF fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Battery Charger, an open or shorted Battery Charger harness, or a poor electrical connection in the Battery Charger circuit. To fix this issue, start by checking the possible causes listed above. Then, visually inspect the related wiring harness and connectors for any damaged components or broken, bent, pushed out, or corroded connector’s pins.

What are the signs that the Battery Charger harness is open or shorted, causing the P1EFF fault code?

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Battery Charger or an open or shorted Battery Charger harness. The poor electrical connection in the Battery Charger circuit can also cause the P1EFF fault code. To fix this issue, you need to visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

p1eff error fault code explained

If your engine light is on, it could be due to a faulty battery charger, open or shorted harness, or poor electrical connection.

Visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out pins.

Scroll to Top