The P1EFE fault code in automobiles indicates a problem with the battery charger system. The most common symptom is the illumination of the engine light or service engine soon warning light.

The cause of this issue could be a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. It is important to address this issue promptly as it can lead to further damage to the vehicle’s electrical system. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1efe fault code.

Here are the symptoms to look out for:

  • The P1EFE fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P1EFE automobile fault code can be caused by a faulty battery charger, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1EFE can be caused by a faulty battery charger.
  • It can also be caused by an open or shorted battery charger harness.
  • Additionally, a poor electrical connection in the battery charger circuit can also trigger this fault code.

To fix the p1efe fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1efe, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1EFE has an estimated repair time of 1.0 hour.

The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of P1EFE will depend on the hourly rate charged by the repair shop. It is important to consider these factors when estimating the cost of fixing this fault code.

The P1EFE fault code is related to the battery charger’s reverse polarity protection circuit performance. This fault code indicates that the battery charger’s 14 V output circuit is connected to the vehicle’s 12 V system.

The battery charger monitors the 14 V output for proper current and voltage conditions and has the ability to drive the voltage to 14 V.

What are the possible causes of the P1EFE automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1EFE fault code. This code is often caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors related to the P1EFE fault code?

If you’re experiencing the P1EFE fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you can visually inspect the wiring harness and connectors related to the issue. The possible causes of this fault code include a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors for any damaged components or broken, bent, pushed out, or corroded connector’s pins.

What should I look for when checking for damaged components and connector pins related to the P1EFE fault code?

If you’re experiencing the P1EFE fault code, which is indicated by the engine light or service engine soon warning light turning on, you should check for a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, visually inspect the wiring harness and connectors, and check for damaged components. Look for broken, bent, pushed out, or corroded connector pins.

p1efe error fault code explained

If your engine light is on, it could be due to a faulty battery charger, open or shorted harness, or poor electrical connection.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top